Journal Paper

1. "The effect of plasticizers on rheological, physical and mechanical properties of low cement high alumina gunning refractories"
   Mohammad Mobasheri, Ali Mohammad Hadian, Yasaman Mohammadi, Behzad Azimi, Mehrnoosh Kamali
   Scientific Reports, Vol. 15, pp.1-16, 2025
2. "Joining of alumina to Tetragonal Zirconia Polycrystal (TZP) using a Bi2O3-Y2O3 filler"
   Mohammad Nejabat, Ali Mohammad Hadian, Cyrus Zamani
   CERAMICS INTERNATIONAL, Vol. 50, No 21, pp.40880-40888, 2024
3. "Cryomilling-Assisted Synthesis of Nanostructured Silicon"
   Elnaz Shahsavari, Cyrus Zamani, Hossein Ahmadi Dermeni, Ali Mohammad Hadian, Amir Hadian
   Journal of Ultrafine Grained and Nanostructured Materials, Vol. 53, No 2, pp.158-165, 2020
4. "Improved mechanical properties of NbC-M2 high speed steel-based cemented carbide by addition of multi-walled carbon nanotubes"
   Reza Smaeilzadeh, Cyrus Zamani, Hendrik Reinhardt, Michael Dasbach, Norbert Hampp, [] [], Ali Mohammad Hadian
   International Journal of Refractory Metals and Hard Materials, Vol. 93, No 93, 2020
5. "On the Role of Bonding Time on Microstructure and Mechanical Properties of TLP Bonded Al/Mg2Si Composite"
   Milad Ghayoor Baghbani, Ali Mohammad Hadian
   Journal of Composites Science, Vol. 3, No 3, 2019
6. "Effects of milling time and temperature on phase evolution of AISI 316 stainless steel powder and subsequent sintering"
   Reza Esmaeilzadeh, Mahdiyar Salimi, Cyrus Zamani, Ali Mohammad Hadian, Amir Hadian
   JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 766, pp.341-348, 2018
7. "The effect of brazing parameters on corrosion behavior of brazed aluminum joints"
   Farzam Ghasimakbari, Ali Mohammad Hadian, Sohail Ershadrad, Amir Mansoor Omidazad
   AIP Conference Proceedings, Vol. 1920, No 1, 2018
8. "Modeling and optimization of compressive strength and bulk density of metakaolin-based geopolymer using central composite design: A numerical and experimental study"
   Mohammad Ghanbari, Ali Mohammad Hadian, Amir Abas Nourbakhsh, K. J. D. Mackenzie
   CERAMICS INTERNATIONAL, Vol. 43, No 1, pp.324-335, 2017
9. "Effect of time and temperature on TLP bonding of alumina using a bismuth oxide interlayer"
   Omid Bahman Dehkordi, Ali Mohammad Hadian
   CERAMICS INTERNATIONAL, Vol. 42, No 2, pp.1705-1712, 2015
10. "Synthesis and sintering of TiB2 nanoparticles"
    امین ربیعی زاده, Ali Mohammad Hadian, Abolghasem Ataei
    CERAMICS INTERNATIONAL, Vol. 40, No 40, pp.15775-15782, 2014
11. "Effect of brazing time on microstructure and mechanical properties of cubic boron nitride/steel joints"
    Reza Johari Miab, Ali Mohammad Hadian
    CERAMICS INTERNATIONAL, Vol. 40, No 6, pp.8519-8524, 2014
12. "Transient Liquid Phase Bonding of Alumina to Alumina via Bismuth Oxide Interlayer"
    Omid Bahman Dehkordi, Ali Mohammad Hadian
    Advanced Materials Research, Vol. 829, No 1, pp.136-140, 2014
13. "Interfacial Examination of Cu/Al Joints Using Ultrafine Al-Si Powder as Brazing Filler Metal"
    Maryam Yarveicy, Ali Mohammad Hadian
    Advanced Materials Research, Vol. 829, No 1, pp.52-56, 2014
14. "Combustion Syntheses and Sintering of TiB2-Al2O3 Composites; Investigating the Effects of Different Al-Content as a Precursor"
    Elha Sadat Montakhab, Ali Mohammad Hadian
    Advanced Materials Research, Vol. 829, No 1, pp.549-553, 2014
15. "Transient Liquid Phase Bonding of Al/Mg2Si Composite using a Cu-Ni Mixed Powder"
    Milad Ghayoor Baghbani, Ali Mohammad Hadian
    Advanced Materials Research, Vol. 829, No 1, pp.632-637, 2014
16. "Diffusion Bonding of Alumina using Interlayer of Mixed Hybride nano Powders"
    Navid Hoseinabadi, رسول صراف ماموری, Ali Mohammad Hadian
    Advanced Materials Research, Vol. 40, No 10, pp.3011-3021, 2013
17. "Sintering of Al2O3 - TiB2 nano - composite derived from milling assisted sol - gel method"
    Amin Rabiey Zadh, Abolghasem Ataei, Ali Mohammad Hadian
    Int. Journal of Refractory Metals & Hard Materials, Vol. -, No 33, pp.58-64, 2012
18. "Preparation of alumina/titanium diboride nano-composite powder by milling assisted sol–gel method"
    Amin Rabiey Zadh, Ali Mohammad Hadian, Abolghasem Ataei
    International Journal of Refractory Metals and Hard Materials, Vol. 31, No 31, pp.121-124, 2012
19. "EFFECT OF REINFORCEMENT CONTENT AND CONSOLIDATION PROCEDURES ON PROPERTIES OF ALUMINUMBORON CARBIDE NANOCOMPOSITES"
    Mehrdad Khakbiz, Ali Mohammad Hadian, Farshad Akhlaghi
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 5, No 1, pp.589-597, 2012
20. "Purification of Attrition Milled Nano - size Boron Carbide Powder"
    Ardovan Sokhansanj , Ali Mohammad Hadian
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 5, No 1, pp.94-101, 2012
21. "The Comparison between Boron Carbide ( B4C ) with other Common Inhibitors on Physical and Mechanical Properties of WC / Co"
    H Tamizifar , Ali Mohammad Hadian, M Tamizifar
    INTERNATIONAL JOURNAL OF MODERN PHYSICS C, Vol. 5, No 5, pp.102-110, 2012
22. "Mechano - chemical synthesis of TiB2 - Al2O3 nano - composite by reaction between TiO2 B2O3 and Al"
    Ali Mohammad Hadian, Abolghasem Ataei, Amin Rabiezadeh
    Advanced Materials Research, Vol. 488-489, pp.955-959, 2012
23. "Experimental and Numerical Thermomechanical Analysis of Hybrid Friction Welding of Commercially Pure Copper Bars"
    H Davari , Hadi Davaria , Mohammad Habibi Parsa, Mohammad Habibi Parsa, Ali Mohammad Hadian, Ali Mohammad Hadian, Mahmoud Nili Ahmadabadi, Mahmoud Nili Ahmadabadi
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 26, No 5, pp.694-702, 2011
24. "Diffusion Bonding Characteristics of 410 Stainless Steel/Cu with Ni Interlayer"
    Abbas Zarei Hanzki, Hamid Sabet-ghadam, Alireza Araee, Ali Mohammad Hadian
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, Vol. 26, No 2, 2010
25. "Interfacial phenomena in brazing of a stainless steel face sheet to a honeycomb core"
    Saeed Mehrizi , Amir Hadian , Ali Mohammad Hadian, Ali Vosoogh
    Advanced Materials Research, Vol. 83-86, pp.1236-1242, 2009
26. "Synthesis of High Purity Micron Size Boron Carbide Powder from B2O3/C Precursor"
    Ali Mohammad Hadian, Jafar Asad Bigdeloo
    International Journal of Recent Trends in Engineering, Vol. 1, No 5, pp.176-180, 2009
27. "Investigation on wetting behaviour of B4C by Ni based brazing alloys"
    Ali Mohammad Hadian, Ehsan Mirsalehi
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, Vol. 15, No 1, pp.48-53, 2009
28. "Effects of Concentration of TTIP Producer Agent on ZrO2/nano TiO2 Powder Synthesis"
    E Mohammadi , Hossein Abdizadeh, H R Baharvandi , Ali Mohammad Hadian
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 22, pp.3216-3224, 2008
29. "Synthesis of Nano - Size MgO Powder by Chemical Deposition of Low Cost Raw Materials"
    Mihammad Ahmadzadeh , Hamid Reza Baharvandi , Hossein Abdizadeh, Ali Mohammad Hadian
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 22, 2008
30. "Effect Of Concentration of TTIP producer agent on ZrO2 / Nano TiO2 powder synthesis"
    Ebrahim Mohammadi , Hossein Abdizadeh, Hamid Reza Baharvandi , Ali Mohammad Hadian
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 22, pp.3224-3216, 2008
31. "Investigation on addition of ZrO2 - 3mol% Y2O3 Powder on Sintering Behavior and Mechanical Properties of B4C"
    Hossein Abdizadeh , Naser Ehsani , Ali Mohammad Hadian, Hamid Reza Baharvandi
    JOURNAL OF MATERIALS SCIENCE, Vol. 41, No 16, pp.5269-5272, 2006
32. "Investigation on Addition of Kaolinite on Sintering Behavior and Mechanical Properties of B4C"
    Naser Ehsani , Hossein Abdizadeh, Ali Mohammad Hadian, Hamid Reza Baharvandi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 15, pp.280-283, 2006
33. "Investigation on history of production of base-glaze in Islamic texts"
    Ali Aarab, Bahman Firouz Mandi Shireh Jin, پرستو مسجدی خاک, آرمان شیشه گر, Ali Mohammad Hadian
    History of Science, Vol. 19, No 1, pp.223-243, 2021
34. "The effect of addition of nano-silica on properties of metakaolan based geopolymers"
    Mohammad Ghanbari, Ali Mohammad Hadian, Amir Abas Noorbakhsh
    Science and Engineering of Ceramics, Vol. 6, No 1, pp.85-95, 2017
35. "Evaluation of wear properties of Al7075/SiC-BN hybrid nano-composite surface layer produced by friction stir processing"
    Mahmoud Soleymani, Seyed Farshid Kashani Bozorg, Ali Mohammad Hadian
    Quarterly new processes in materials engineering, Vol. 10, No 1, pp.47-57, 2016
36. "Diffusion Bonding of Alumina using a mixture of Nano Hydride Particles"
    Navid Hosainabadi, رسول صراف ماموری , Ali Mohammad Hadian
    New Products, Vol. 5, No 1, pp.1-13, 2014
37. "Effect of processing route of alumina/titanium diboride on its sintering behaviour"
    Amin Rabiey Zadh, Abolghasem Ataei, Ali Mohammad Hadian
    New Products, Vol. 3, No 3, pp.45-58, 2013
38. "Effects of raw materials type on the phase composition and morphology of M type magnetic ferrite"
    Abolghasem Ataei, Ali Mohammad Hadian, Saeid Heshmati Manesh
    University, Vol. 33, No 2, pp.65-75, 1999

Conference Paper

1. "Investigation of the Joinability of Alumina to Yttria Stabilized Zirconia via Brazing using an Oxide Filler"
   Mohammad Nejabat ghamsary, Ali Mohammad Hadian, Cyrus Zamani
   4th International Conference on Ceramics, 2024
2. "Improving the properties of alumina castable refractories by using silica-sol as binding agent"
   [] [], Ali Mohammad Hadian, Cyrus Zamani
   4th International Conference on Ceramics, 2024
3. "The effect of hardening accelerators on the properties of low cement alumina-based gunning refractories with aluminum silicate plasticizer"
   Mohammad Mobasheri, Mohammad reza Hadinasab, Ali Mohammad Hadian, Cyrus Zamani
   UFGNSM 2023, 2023
4. "Effects of Steel fibers and Cu Powder on wear and friction characteristics of brake pads"
   Maedeh Asa, Milad Kazemi, Ali Mohammad Hadian
   UFGNSM 2023, 2023
5. "Brazing of Alumina to Zirconia using an oxide filler"
   Mohammad Nejabat, Ali Mohammad Hadian, Cyrus Zamani
   UFGNSM 2023, 2023
6. "Investigation on physical, mechanical and gunning properties of monolithic low cement alumina-based refractories"
   Mohammad Mobasheri, Ali Mohammad Hadian, Yasaman Mohammadi
   IMAT 2022, 2022
7. "Post-Heat Treatment Of Nbc-M2 High-Speed Steel Cemented Carbides: The Effect On Microstructure And Mechanical Properties"
   [] [], Mohammadreza Hosseini nia, Cyrus Zamani, Mahdiyar Salimi, Ali Mohammad Hadian, Frank Clemens
   World PM 2022, 2022
8. "A Novel Antibacterial and Low-cost Ceramic Membrane Coated with Ni-doped ZnO Nanoparticles for Water Purification"
   Arvin Alvandi, Mohammad Hossein Sarrafzadeh, Seyedbehnam Ghaffari, Ali Mohammad Hadian
   16th Nanoscience and Nanotechnology Conference (NanoTR-16), 2022
9. "Effect of addition of alumina nano whisker on microstructure and mechanical properties of a lead-free tin based solder"
   Mostafa Beitsoode, Ali Mohammad Hadian, Cyrus Zamani
   UFGNSM2021, 2021
10. "Interfacial phenomena at NbC-M2 Cemented Carbide/AISI 4140 Steel Using Brazing Technique"
    Amirhosein Dini, Ali Mohammad Hadian, Cyrus Zamani, [] []
    UFGNSM2021, 2021
11. "Effect of Cryomilling on Magnesium/Silica Mixtures For LiB Anodes"
    Cyrus Zamani, Elnaz Shahsavari, AMIR HADIAN, Ali Mohammad Hadian
    UFGNSM 2019, 2019
12. "Interfacial phenomena in TLP bonding of Al2O3 using a Bi2O3 interlayer"
    Omid Bahman Dehkordi, Ali Mohammad Hadian
    10th Iranian ceramic society congress, 2015
13. "Effect of joining time on the mechanical properties and microstructure of alumina/bismuth oxide/alumina joints using a TLP method."
    Omid Bahman Dehkordi, Ali Mohammad Hadian
    8th congress &3th international Engineering Materials & Metallurgy, 2014
14. "Effect of synthesis method on sintering behavior of alumina/titanium diboride nano-composite"
    امین ربیعی زاده, Ali Mohammad Hadian, Abolghasem Ataei
    The 3rd International Conference on Composites: Characterization Fabrication and Application (CCFA-3, 2012
15. "Effect of Addition of Blast Furnace Slag on production of Melt Chanel Refractories"
    Mohammad Aref Zand Vakili, Ali Mohammad Hadian
    The 12th International Conference on Materials and Metallurgical Engineering., 2023
16. "Characterization of fracture surfaces of brazed samples using a nano composite tin/silver alloy after shear testing."
    Mohammad Amin Soleymani Shaldehi, Ali Mohammad Hadian, Ahmadali Amade
    iMat 2022, 2022
17. "Investigation on micro structure, physical and mechanical properties of cordierite bodies prepared from domestic raw materials"
    Samineh Akbar molaei, Amir Hadian, Ali Mohammad Hadian, Cyrus Zamani
    The 10th international conference on materials and metallurgical engineering, 2021
18. "Investigation on micro structure, physical and mechanical properties of steatite bodies prepared from domestic raw materials"
    Maryam Gharibiyan bajestani, Ali Mohammad Hadian, Cyrus Zamani
    The 10th international conference on materials and metallurgical engineering, 2021
19. "Synthesis of Nanostructured Hollow Silicon Using Self-Assembled Template"
    Hossein Ahmadi Dermeni, Cyrus Zamani, Alireza Babaei, Ali Mohammad Hadian
    9th International Conference on Materials Science and Metallurgical Engineering, 2020
20. "Effect of cryogenic milling on mixing of Mg/SiO2 mixture for silicon production"
    Elnaz Shahsavari, Cyrus Zamani, Ali Mohammad Hadian, Amir Hadian
    The 12th Congress of Iranian Ceramic Society, 2019
21. "Thermal Shock Resistance of Cordierite Bodies Fabricated Using Domestic Raw Materials"
    Ali Sokouti, Ali Mohammad Hadian, Cyrus Zamani, Amir Hadian
    The 12th Congress of Iranian Ceramic Society, 2019
22. "Clad welding of MCrAlY + SiO2 on 718IN superalloy by laser and its high temperature properties"
    Kazem Johari, Seyed Masoud Barekat, Seyed Farshid Kashani Bozorg, Ali Mohammad Hadian
    19th NCWI & 8th NCNDT, 2019
23. "Study of Room Temperature Extrusion of Aluminium Nitride"
    Shiva Fraydoni, Behtash Mani, Mohammad Hosain Paydar, Ali Mohammad Hadian
    iMat 2016, 2016
24. "Investigating effective parameter in processing of TiB2-Al2O3 Composites prepared by SHS method"
    Elha Sadat Montakhab, Ali Mohammad Hadian
    10th Iranian Ceramic Society Congress, 2015
25. "Synthesis of Titanium deboride by Sol-Gel Method"
    Amin Rabiey Zadh, Ali Mohammad Hadian, Abolghasem Ataei
    10th Iranian Ceramic Society Congress, 2015
26. "Joining of alumina to alumina by Bismuth oxide using transient liquid phase bonding"
    Omid Bahman Dehkordi, Ali Mohammad Hadian
    9th Iranian Ceramic Society Congress, 2013
27. "Microstructural examinations of green body silicon nitride joints without interlayer"
    Amir Hadian, Ali Mohammad Hadian
    9th Iranian Ceramic Society Congress, 2013
28. "The effect of interfacial reactions on strength of WC-Co/Steel joints using a brazing technique"
    Sima Sakhaie, Ali Mohammad Hadian
    9th Iranian Ceramic Society Congress, 2013
29. "Investigating the metallurgical and mechanical behavior of boron nitride to steel joints"
    Reza Johari Miab, Ali Mohammad Hadian
    9th Iranian Ceramic Society Congress, 2013
30. "Investigating the low temperature bonding of boron carbide by sol-gel method"
    Elham Asgari, Ali Mohammad Hadian
    9th Iranian Ceramic Society Congress, 2013