Journal Paper

1. "Sustainable Upcycling of Waste Banknotes into High-Performance Cellulose Acetate: Properties, Characterization and Environmental Implications"
   Amin Kalantari, Mahdi Jonoobi, علیرضا عشوری, Payam Moradpour
   JOURNAL OF POLYMERS AND THE ENVIRONMENT, Vol. 32, No 12, 2024
2. "Possibility of making flexible three-ply plywood using poplar (Populus deltoides) and Paulownia (Paulownia fortunei) veneers"
   Parisa Sedighizadeh, Payam Moradpour, Hamid Zarea Hossainabadi
   European Journal of Wood and Wood Products, Vol. 1, No 1, pp.1-13, 2022
3. "Effects of growth rate of eastern poplar trees on the chemical and morphological characteristics of wood fibers"
   Mohammad Reza Borukanlu, Omid Hossein Zadeh, Payam Moradpour, ehsan khedive
   European Journal of Wood and Wood Products, Vol. 1, No 1, 2021
4. "The effect of resin type and strand thickness on applied properties of poplar parallel strand lumber made from underutilized species"
   Payam Moradpour, Maryam Behnia, حمیدرضا پیرایش , Younes Shirmohammadli
   European Journal of Wood and Wood Products, Vol. 77, No 5, pp.811-819, 2019
5. "Water resistance improvement by polyethyleneimine of tannin-furfuryl alcohol adhesives"
   Younes Shirmohammadli, Payam Moradpour, Ali Abdulkhani, Davood Efhamisisi, Antonio Pizzi
   International Wood Products Journal, Vol. 10, No 1, 2019
6. "Flexural performance of cross-laminated timber constructed from fibre-managed plantation eucalyptus"
   Halimeh Pangh, Hamid Zarea Hossainabadi, Nathan Katlarewski, Payam Moradpour, Michael Lee, Gregory Nolan
   CONSTRUCTION AND BUILDING MATERIALS, Vol. 208, pp.535-542, 2019
7. "Laminated strand lumber (LSL) reinforced by GFRP; mechanical and physical properties"
   Payam Moradpour, حمیدرضا پیرایش , Masood Grami, Iman Rashidi Jooybari
   CONSTRUCTION AND BUILDING MATERIALS, Vol. 158, No 2, pp.236-242, 2018
8. "Measurement of wood cutting forces during bandsawing using piezoelectric dynamometer in mode A"
   Payam Moradpour, Frieder Scholz, Kazem Doust Hoseini, Asghar Tarmian
   Drvna Industrija, Vol. 1, No 67, 2016
9. "Particleboard from wood particles and sycamore leaves: Physico-mechanical properties"
   حمید پیرایش, Payam Moradpour, ن سپهوند
   Engineering in Agriculture, Environment and Food, Vol. 1, No 1, 2014
10. "Oxidative Activation of Bagasse Fibers Surfaces in MDF Manufacturing"
    Kazem Doust Hoseini, Hamid Zarea Hossainabadi, Payam Moradpour
    Drvna Industrija, Vol. 3, No 64, pp.239-245, 2013
11. "Cutting forces in bandsaw processing of oak and beech wood as affected by wood moisture content and cutting directions"
    Payam Moradpour, Kazem Doust Hoseini, Frieder Scholz, Asghar Tarmian
    European Journal of Wood and Wood Products, Vol. 71, No 6, pp.747-754, 2013
12. "Investigating the possibility of direct production of cellulose acetate polymer from waste banknotes"
    Amin Kalantari, Mahdi Jonoobi, Payam Moradpour, سحاب حجازی
    Iranian journal of wood and paper industries (IJWP), Vol. 15, No 2, 2024
13. "The effect of using the additive CZ100 to reduce the amount of consumable wood in manufacturing particleboard"
    Mohammad Hosean Abed, سیما سپهوند, Mahdi Jonoobi, Payam Moradpour, Behzad Blouri
    Iranian journal of wood and paper industries (IJWP), Vol. 15, No 1, pp.67-77, 2024
14. "Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica) treated with ACC and ACQ with emphasis on the use in NLT"
    ZAHRA BAHMANI, Payam Moradpour, Asghar Tarmian
    Iranian journal of wood and paper industries (IJWP), Vol. 15, No 2, pp.113-125, 2023
15. "Modification and Improvement of the Properties of Polyvinyl Acetate Using Nano silica"
    Mohammad Najafian ashrafi, Payam Moradpour, احمد جهان لتیباری , حمیدرضا عدالت
    Iranian Journal of Wood and Paper Science Research, Vol. 38, No 2, pp.128-140, 2023
16. "Numerical and experimental investigation of stress carrying capacity of reinforced L-shaped corner joints with corner block in wooden chair under diagonal tension"
    [] [], Hamid Zarea Hossainabadi, مسیب دالوند, Payam Moradpour
    JOURNAL OF FOREST AND WOOD PRODUCTS (JFWP) (IRANIAN JOURNAL OF NATURAL RESOURCES), Vol. 75, No 3, pp.295-307, 2022
17. "Designing, manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood"
    Farokh Radfar, Hamid Zarea Hossainabadi, Payam Moradpour, Kambiz Pourtahmasi
    Iranian journal of wood and paper industries (IJWP), Vol. 13, No 3, pp.375-391, 2022
18. "Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods"
    KAMBIZ RASHEDI, Payam Moradpour, Hamid Zarea Hossainabadi
    Iranian journal of wood and paper industries (IJWP), Vol. 12, No 4, pp.521-536, 2022
19. "Evaluation of wood machining parameters and surface quality in cutting processes by water jet without abrasive material"
    Payam Moradpour, Amin Gholizadeh Mehdikhan Mahalleh, Hadi Gholamiyan
    Iranian journal of wood and paper industries (IJWP), Vol. 12, No 3, pp.427-438, 2021
20. "An overview of the properties of nanofilters derived from cellullose nanofiibers for the adsorption of air pollutants"
    سیما سپهوند, Mahdi Jonoobi, Payam Moradpour, Alireza Ashori
    Iranian journal of wood and paper industries (IJWP), Vol. 11, No 3, pp.497-511, 2020
21. "Designing Ergonomic Furniture Based on Students Anthropometry attributes; Collage of Agriculture and Natural Resources, University of Tehran"
    Hossein Manouchehri, Payam Moradpour, Mohammad Amin Mououdi, ابراهیم آقارفیعی
    Journal of Ergonomic, Vol. 8, No 3, pp.70-84, 2020
22. "Investigation of releasing mechanism of silver nitrate in the nanocellulose based hydrogel pad for burn healing"
    Mahdi Jonoobi, Payam Moradpour, علی اکبر تفنگچی کله بستی
    Iranian journal of wood and paper industries (IJWP), Vol. 11, No 2, pp.333-344, 2020
23. "Experimental investigation of the behavior of joints by glued- in steel and glass fiber reinforced plastic rods parallel to poplar wood grain"
    Moharram Hazrati, Hamid Zarea Hossainabadi, Payam Moradpour, اصغر وطنی‌اسکوئی
    JOURNAL OF FOREST AND WOOD PRODUCTS (JFWP) (IRANIAN JOURNAL OF NATURAL RESOURCES), Vol. 73, No 1, pp.63-75, 2020
24. "Ergonomic evaluation of the effect of chainsaw on Vibration White Finger disease (VWF) in the operator"
    Somayeh Khajavi, Meghdad Jourgholami, Baris Majnounian Gharghez, Payam Moradpour
    JOURNAL OF FOREST AND WOOD PRODUCTS (JFWP) (IRANIAN JOURNAL OF NATURAL RESOURCES), Vol. 72, No 7, 2020
25. "The effect of accelerated weathering on the abrasion resistance of wood-species coated with linseed oil"
    Hadi Gholamiyan, Payam Moradpour
    Journal of Wood & Forest Science & Technology, Vol. 26, No 3, pp.43-54, 2020
26. "Extraction of highly purified chitosan from shrimp shells with high de-acetylation degree"
    هادی کنعانی, Mahdi Jonoobi, Payam Moradpour, Gholamreza Rafiei
    Journal of Wood & Forest Science & Technology, Vol. 26, No 2, pp.87-101, 2019
27. "investigation of fracture mechanics and internal bonding in OSB from poplar wood"
    Payam Moradpour, Hamid Zarea Hossainabadi, Hassan Teymorian Balkhkanloo
    Iranian journal of wood and paper industries (IJWP), Vol. 9, No 4, pp.549-559, 2019
28. "Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations"
    Somayeh Khajavi, Meghdad Jourgholami, Baris Majnounian Gharghez, Payam Moradpour
    Iranian journal of wood and paper industries (IJWP), Vol. 9, No 4, pp.471-483, 2019
29. "The effffectt off modiiffiied polly viinyll acettatte on tthe sttress carryiing capaciitty off corner jjoiintts iin tthe wood members jjoiined wiitth dowell"
    Ayoub Salari, Mohammad Mahdi Faezi Poor, Ali Naghi Karimi Mazraeh Shahi, Mahdi Jonoobi, Payam Moradpour
    Iranian journal of wood and paper industries (IJWP), Vol. 9, No 3, pp.223-336, 2018
30. "Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it"
    Payam Moradpour, Behzad Bolori, Abbas Akhavan Sepahi, Maedeh Ahadnezhad, Mahdi Jonoobi
    Iranian journal of wood and paper industries (IJWP), Vol. 9, No 2, 2018
31. "Antifungal properties of cellulose nanocrystals and chitosan nanofiber on the current banknotes"
    Payam Moradpour, Abbas Akhavan Sepahi, Mahdi Jonoobi
    Journal of Wood & Forest Science & Technology, Vol. 25, No 1, 2018
32. "The trigonometric calculation of twisting angle in spiral stair from beech wood"
    Farokh Radfar, Hamid Zarea Hossainabadi, Mohammad Layeqi, Payam Moradpour
    Iranian journal of wood and paper industries (IJWP), Vol. 3, No 8, pp.419-427, 2017
33. "Study on Properties of Wood-Composite Prepared from Wood Flour and Recycled Polycarbonate (Used CD)"
    Ali Abdulkhani, Razieh Shamsi, Mohammad Mahdi Faezi Poor, Payam Moradpour, Soheila Eizadyar
    Iranian journal of wood and paper industries (IJWP), Vol. 8, No 3, pp.375-385, 2017
34. "Analysis of stress- strain distribution of dowel and glue line in furniture joint with finite element method"
    Mosayeb Dalvand, Payam Moradpour
    Iranian journal of wood and paper industries (IJWP), Vol. 8, No 2, 2017

Conference Paper

1. "Laminated bio- composite from date palm rachis long fiber and milk weed silk"
   Mohammadhasan Mazaheri far, Hamid Zarea Hossainabadi, Camelia Cosereanu, Payam Moradpour, Ahmad Ataeifar, Mohammad Hossein Mazaheri
   composite application in technology conference (3nd), 2023
2. "Engineered wood products: a step towards the production of sustainable construction materials"
   Payam Moradpour
   The second national green waste management conference, 2022
3. "Wood waste: recycling, application, management strategy"
   Payam Moradpour
   The second national green waste management conference, 2022
4. "Investigating on the mechanism of wood cutting with laser and the factors affecting it"
   Payam Moradpour, Farokh Radfar
   The fourth national conference on knowledge and innovation in the wood and paper industry, 2022
5. "Prediction of band saw blade wear using cutting forces and surface quality"
   Payam Moradpour
   The fourth national conference on knowledge and innovation in the wood and paper industry, 2022
6. "Design and construction of double sloping training desk and chair with the approach of using the second generation of ergonomic furniture"
   Hossein Manouchehri, Payam Moradpour
   The 3nd national conference on knowledge and innovation in the wood and paper industry, 2021
7. "The effect of heat and mechanical treatment on the surface roughness of Paulownia and poplar wood"
   KAMBIZ RASHEDI, Payam Moradpour, Hamid Zarea Hossainabadi
   The 3nd national conference on knowledge and innovation in the wood and paper industry, 2021
8. "The current market and future outlook of engineered wood products(EWP)"
   Payam Moradpour, Amin Kalantari
   The 3nd national conference on knowledge and innovation in the wood and paper industry, 2021
9. "Evaluation and comparison of the fire resistance of poplar and Paulownia wood Treated with water and steam and compressed into the hot and cold press"
   KAMBIZ RASHEDI, Payam Moradpour, Hamid Zarea Hossainabadi, پیمان احمدی
   The 3nd national conference on knowledge and innovation in the wood and paper industry, 2021
10. "Analysis of Flexural Properties of Nano Composite with Adding NanoClay"
    AHMAD SAMARIHA, KAMBIZ RASHEDI, Payam Moradpour, MEHDI ASADOLLAHI BANA KAKHI
    The 2nd national conference on knowledge and innovation in the wood and paper industry, 2019
11. "The effect of nanosilica on the fire behavior of multistructures of poplar wood flour-polyethylene composite"
    Payam Moradpour, AHMAD SAMARIHA, KAMBIZ RASHEDI, alireza khakifirouz
    The 2nd national conference on knowledge and innovation in the wood and paper industry, 2019
12. "Investigation on the tensile strength and izod impact strength with adding nanoclay on nano-composites derived from waste polyethylene and OCC pulp"
    Payam Moradpour, KAMBIZ RASHEDI, AHMAD SAMARIHA, MEHDI ASADOLLAHI BANA KAKHI
    The 2nd national conference on knowledge and innovation in the wood and paper industry, 2019
13. "Agriculture of fast growing species appropriate strategy to supply raw material for sellose industries with a sustaininable development approach"
    Hossein Manouchehri, Payam Moradpour
    International Conference on Natural Resources Management in Developing Countries, 2018
14. "Morphological Characteristics of Populus deltoides"
    Omid Hosseinzade, Mohammadreza Brokanlo, Payam Moradpour, Saman Khadiv
    National Conference on Knowledge and Innovation on Wood and Paper Industry with Environment Approach, 2017
15. "echo-friendly wood plastic composite using palm wastes and polyethylene materials"
    Payam Moradpour, Hamed Gholizadeh, Masuod Shafiee
    National Conference on the Protection of the Environment, 2017
16. "The possibility of using wood- based composite in green municipal furniture"
    Hasan Teymoriyan, Payam Moradpour, Hamid Zarea Hossainabadi
    The 2nd international conference on researches in science & engineering, 2017
17. "application of WPC from lignocellulosic wastes in municipal furniture"
    Hassan Teymorian Balkhkanloo, Hamid Zarea Hossainabadi, Payam Moradpour
    2nd international conference on new ideas in agriculture, environment and turisms, 2016