Journal Paper

1. "Leveraging machine learning for analyzing structural behavior of a composite wind turbine blade"
   Roham Rafiee, Ali Shahcheraghi, Amir Shayestehmanesh
   ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE, Vol. 153, 2025
2. "Stochastic multi-scale modeling for estimating the Mode-I dynamic fracture toughness of CNT-reinforced polymers"
   Reza Yazdanparast, Roham Rafiee
   COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 194, 2025
3. "Developing an analytical solution for stress analysis of composite pipes under combined external pressure and axial load"
   Roham Rafiee, Ali Shahcheraghi
   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 131, 2025
4. "Estimating Strength of 3D-Printed Polymers Based on the Appraisal of Available Methods"
   Roham Rafiee, Hirad Amohaji, Hedi Khezma
   JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. -, pp.1-11, 2025
5. "The effect of notches on the mechanical properties and damage failures of fibre-metal laminates: An experimental and numerical study"
   Hussein Dalfi, Anwer Al-Obaid, Roham Rafiee, Nazar Abdulridha
   PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. x, pp.1-16, 2025
6. "A rate-dependent crack bridging model for dynamic fracture of CNT-reinforced polymers"
   Reza Yazdanparast, Roham Rafiee
   ENGINEERING FRACTURE MECHANICS, Vol. 311, 2024
7. "A 3D nonlinear viscoelastic–viscoplastic constitutive model for dynamic response of an epoxy resin"
   Reza Yazdanparast, Roham Rafiee
   ACTA MECHANICA, Vol. 235, 2024
8. "Dynamic mechanical behavior of CNT-reinforced epoxy under medium-strain rate: A comparative study"
   Reza Yazdanparast, Roham Rafiee, Hamed Kalhori, Bing Li
   COMPOSITE STRUCTURES, Vol. 344, 2024
9. "On the application of genetic algorithm for predicting the strength of CNT/ABS filaments using multi-scale modeling"
   Roham Rafiee, Hirad Amohaji
   APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 130, 2024
10. "A rate-dependent cohesive zone model for dynamic crack growth in carbon nanotube reinforced polymers"
    Reza Yazdanparast, Roham Rafiee
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 300, 2024
11. "Predicting mechanical properties of 3D printed nanocomposites using multi-scale modeling"
    Roham Rafiee, Hadis Zehtabzadeh, Mohammad Reza Amini
    Additive Manufacturing, Vol. 83, No 104055, 2024
12. "Effect of thermoplastic particles on the mechanical performance and damage failure of notched fiber metal laminated"
    Hussein Dalfi, Roham Rafiee, Anwer Al-Obaid, Nazar ABDULRIDHA
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. xx, 2024
13. "A 3D viscoelastic–viscoplastic behavior of carbon nanotube‐reinforced polymers: Constitutive model and experimental characterization"
    Reza Yazdanparast, Roham Rafiee
    POLYMER COMPOSITES, Vol. 44, No 8, 2024
14. "Examining Tensile Properties in Nanocomposite Samples Fabricated through Extrusion-Based Additive Manufacturing"
    Roham Rafiee, Mohammad Reza Amini, Hadis Zehtabzadeh
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. xx, 2023
15. "Optimization of the mechanical performance and damage failure characteristics of laminated composites based on fiber orientation"
    Hussein Dalfi, Anwar Al-Obaid, Abdalameer Tariq, Hussein Razzaq, Roham Rafiee
    Frontiers of Structural and Civil Engineering, Vol. 17, No 2023, 2023
16. "On the strength of polymeric composites exposed to long-term Ultra-Violent radiation"
    Roham Rafiee, Amir Hossein Rahimi
    JOURNAL OF COMPOSITE MATERIALS, Vol. 57, No 17, 2023
17. "Investigating long‐term creep in a composite pipe subjected to transverse loading and aqueous condition"
    Roham Rafiee, Mohammad Naghi Arabian
    POLYMER COMPOSITES, Vol. 44, No 8, 2023
18. "Linkage Learning Optimization of Aeroelastic and Structural Behavior of Composite Wings"
    Roham Rafiee, Touraj Farsadi, Majid Ahmadi Tehrani, Parsa Sharifi
    International Journal of Aeronautical and Space Sciences, Vol. 24, No 2023, 2023
19. "Investigating the influence of pull-out speed on the interfacial properties and the pull-out behavior of CNT/polymer nanocomposites"
    Reza Yazdanparast, Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 316, No 117049, 2023
20. "Randomized Kaczmarz and Landweber Algorithms for Impact Force Identification on a Composite Panel"
    Hamed Kalhori, Roham Rafiee, Lin Ye, Ben Halkon, Muhammad Bahmanpour
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, Vol. 176, No 176, 2023
21. "A micro-macromechanical approach for analyzing creep in randomly oriented short fiber composites"
    Roham Rafiee, Ali Ghamarzadeh
    POLYMER COMPOSITES, Vol. x, 2023
22. "Filament wound pipes optimization platform development: A methodological approach"
    Roham Rafiee, Reza Shahzadi, Soheil Jafari
    COMPOSITE STRUCTURES, Vol. 297, 2022
23. "Structural optimization of filament wound composite pipes"
    Roham Rafiee, Reza Shahzadi, Hossein Speresp
    Frontiers of Structural and Civil Engineering, Vol. x, 2022
24. "Estimating the burst pressure of a filament wound composite pressure vessel using two-scale and multi-scale analyses"
    Roham Rafiee, Amirhesam Salehi
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. 1, No 1, pp.1-16, 2022
25. "A novel recursive multi-scale modeling for predicting the burst pressure of filament wound composite pressure vessels"
    Roham Rafiee, Amirhesam Salehi
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 128, No 5, 2022
26. "Experimental investigation of graphene nanoplatelets effect on the fatigue behavior of basalt/epoxy composite pressure vessels"
    Harun Sepetcioglu, Necmettin Tarakcioglu, Roham Rafiee
    THIN-WALLED STRUCTURES, Vol. 171, No 171, 2022
27. "Dental composites with strength after aging improved by using anodic nanoporous fillers: experimental results, modeling, and simulations"
    Amin Ghorbanhosseini, Roham Rafiee, Andrei Pligovka, Marco Salerno
    ENGINEERING WITH COMPUTERS, Vol. xx, 2022
28. "Determining in-plane material properties of square core cellular materials using computational homogenization technique"
    Reza Yazdanparast, Roham Rafiee
    ENGINEERING WITH COMPUTERS, Vol. xx, 2022
29. "A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part I, model development"
    Roham Rafiee, Sina Sotoudeh Shadbad
    COMPOSITE STRUCTURES, Vol. 277, No 277, 2021
30. "A hysteresis cohesive approach for predicting mixed-mode delamination onset of composite laminates under cyclic loading: Part II, numerical and experimental analyses"
    Roham Rafiee, Sina Sotoudeh Shadbad
    COMPOSITE STRUCTURES, Vol. 277, No 277, 2021
31. "Numerical investigation of the effect of moisture and impurity on long-term creep behavior of polymer composite pipes"
    Arman Khademi, Armin Yousefi, Mojtaba Haghighi Yazdi, Majid Safarabadifarahani, Roham Rafiee
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, Vol. 193, No 193, 2021
32. "Multi-scale Modeling of Polymeric Composites Including Nanoporous Fillers of Milled Anodic Alumina"
    Roham Rafiee, Amirali Eskandriyun, Claudio Larosa, Marco Salerno
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, Vol. xx, 2021
33. "Bending analysis of molded composite grating panels: Theoretical and experimental investigations"
    Roham Rafiee, Reza Yazdanparast, Amin Ghorbanhosseini
    FIBERS AND POLYMERS, Vol. 6, No 22, 2021
34. "Failure analysis of a composite wind turbine blade at the adhesive joint of the trailing edge"
    Roham Rafiee, Mohammad reza Hashemi taheri
    ENGINEERING FAILURE ANALYSIS, Vol. xx, 2020
35. "Experimental study on the effect of hygrothermal environments combined with the sustained mechanical loads on the strength of composite rings"
    Roham Rafiee, Mehdi Maleki, Saeed Rahnama
    COMPOSITE STRUCTURES, Vol. xx, 2020
36. "Characterizing delamination toughness of laminated composites containing carbon nanotubes: Experimental study and stochastic multi-scale modeling"
    Roham Rafiee, Mostafa Sahraei
    COMPOSITES SCIENCE AND TECHNOLOGY, Vol. 201, No 201, 2020
37. "Numerical and experimental analyses of the hoop tensile strength of filament wound composite tubes"
    Roham Rafiee, Faramarz Abbasi
    MECHANICS OF COMPOSITE MATERIALS, Vol. 56, No 4, pp.423-436, 2020
38. "Theoretical Study of Failure in Composite Pressure Vessels Subjected to Low-Velocity Impact and Internal Pressure"
    Roham Rafiee, Hossein Rashedi, Shiva RezaeiAkbarieh
    Frontiers of Structural and Civil Engineering, Vol. xx, 2020
39. "A cohesive zone model for predicting the initiation of Mode II delamination in composites under cyclic loading"
    Roham Rafiee, Sina Sotoudeh Shadbad
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, Vol. 54, No 26, 2020
40. "Analyzing the long-term creep behavior of composite pipes: Developing an alternative scenario of short-term multi-stage loading test"
    Roham Rafiee, Amin Ghorbanhosseini
    COMPOSITE STRUCTURES, Vol. x, 2020
41. "Developing a homogenization approach for estimation of in-plan effective elastic moduli of hexagonal honeycombs"
    Reza Yazdanparast, Roham Rafiee
    ENGINEERING ANALYSIS WITH BOUNDARY ELEMENTS, Vol. 117, No 117, pp.202-211, 2020
42. "Predicting the strength of carbon nanotube reinforced polymers using stochastic bottom-up modeling"
    Roham Rafiee, Hadis Zehtabzadeh
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 126, No 8, 2020
43. "Fatigue analysis of a composite ring: Experimental and theoretical investigations"
    Roham Rafiee, Faramarz Abbasi, Sattar Maleki
    JOURNAL OF COMPOSITE MATERIALS, Vol. x, 2020
44. "Experimental and theoretical investigations of creep on a composite pipe under compressive transverse loading"
    Roham Rafiee, Amin Ghorbanhosseini
    FIBERS AND POLYMERS, Vol. xx, 2020
45. "Developing a micro-macromechanical approach for evaluating long-term creep in composite cylinders"
    Roham Rafiee, Amin Ghorbanhosseini
    THIN-WALLED STRUCTURES, Vol. 151, No 106714, 2020
46. "Predicting Young’s modulus of agglomerated graphene/polymer using multi-scale modeling"
    Roham Rafiee, Amirali Eskandriyun
    COMPOSITE STRUCTURES, Vol. xx, 2020
47. "Investigating the influence of bonded and non-bonded interactions on the interfacial bonding between carbon nanotube and polymer"
    Roham Rafiee, Mostafa Sahraei
    COMPOSITE STRUCTURES, Vol. 238, No 111996, 2020
48. "Theoretical and numerical analyses of composite cylinders subjected to the low velocity impact"
    Roham Rafiee, Amin Ghorbanhosseini, Shiva Rezaee
    COMPOSITE STRUCTURES, Vol. 226, No 226, 2019
49. "Stochastic failure analysis of composite pipes subjected to random excitation"
    Roham Rafiee, Parsa Sharifi
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 224, No 224, 2019
50. "Investigating the Influence of Delamination on the Stiffness of Composite Pipes Under Compressive Transverse Loading Using Cohesive Zone Method"
    Sattar Maleki, Roham Rafiee, Abolfazl Hasannia, Mohammad Reza Habibagahi
    Frontiers of Structural and Civil Engineering, Vol. 13, No 13, 2019
51. "Estimating Young's modulus of graphene/polymer composites using stochastic multi-scale modeling"
    Roham Rafiee, Amirali Eskandriyun
    COMPOSITES PART B-ENGINEERING, Vol. x, 2019
52. "3D Stress Analysis of Generally Laminated Piezoelectric Plates with Electromechanical Coupling Effects"
    Atieh Andakhshideh, Roham Rafiee, Sattar Maleki
    applied mathematical modeling, Vol. x, 2019
53. "Equivalent reinforcement isotropic model for fracture investigation of orthotropic materials"
    Mehdi Fakoorsaghieh, Roham Rafiee, Zare hossein abadi Shahab
    STEEL AND COMPOSITE STRUCTURES, Vol. 30, No 1, pp.1-12, 2019
54. "The influence of hygrothermal environments on the stress concentration in unidirectional composite lamina"
    Saeid Rahnama, Roham Rafiee, Mehdi Maleki
    MECHANICS OF MATERIALS, Vol. 129, No 129, pp.332-340, 2019
55. "A Study on Fracture Behavior of Semi-Elliptical 3D Crack in Clay-Polymer Nanocomposites Considering Interfacial Debonding"
    Meghdad Zahedi, Reza Maleki Moghadam, Roham Rafiee, Ugo Icardi
    ENGINEERING FRACTURE MECHANICS, Vol. 209, pp.245-259, 2019
56. "Predicting mechanical properties of nanoclay/polymer composites using stochastic approach"
    Roham Rafiee, Reza Shahzadi
    COMPOSITES PART B-ENGINEERING, Vol. 152, No 152, pp.31-42, 2018
57. "Evaluating mechanical performance of GFRP pipes subjected to transverse loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    THIN-WALLED STRUCTURES, Vol. 131, pp.347-359, 2018
58. "On The Stiffness Prediction of GFRP Pipes Subjected to Transverse Loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    KSCE Journal of Civil Engineering, Vol. x, 2018
59. "Investigating structural failure of a filament-wound composite tube subjected to internal pressure: Experimental and theoretical evaluation"
    Roham Rafiee, Mohammadali Torabi, Sattar Maleki
    POLYMER TESTING, Vol. xx, 2018
60. "Mechanical Properties of Nanoclay and Nanoclay Reinforced Polymers: A Review"
    Roham Rafiee, Reza Shahzadi
    POLYMER COMPOSITES, Vol. x, 2018
61. "Stochastic Prediction of Burst Pressure in Composite Pressure Vessels"
    Roham Rafiee, Mohammad Ali Torabi
    COMPOSITE STRUCTURES, Vol. 185, No 185, pp.573-583, 2017
62. "Comparative study on predicting Young's modulus of graphene sheets using nano-scale continuum mechanics approach"
    Roham Rafiee, Amirali Eskandriyun
    PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, Vol. 90, No 90, pp.42-48, 2017
63. "Stochastic fatigue analysis of glass fiber reinforced polymer pipes"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 167, No 167, pp.96-102, 2017
64. "Investigating interaction between CNT and polymer using cohesive zone model"
    Roham Rafiee, Amin Ghorbanhosseini
    POLYMER COMPOSITES, Vol. xx, 2017
65. "Stochastic multi-scale modeling of randomly grown CNTs on carbon fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    MECHANICS OF MATERIALS, Vol. 106, No 106, pp.1-7, 2017
66. "The influence of fiber-crack angle on the crack tip parameters in orthotropic materials"
    Mehdi Fakoorsaghieh, Roham Rafiee, Masood Sheikhansari
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 231, No 3, pp.418-431, 2017
67. "Theoretical modeling of fatigue phenomenon in composite pipes"
    Roham Rafiee, Ferestesh Eslami
    COMPOSITE STRUCTURES, Vol. 161, No 161, pp.256-263, 2017
68. "Electrical and electromagnetic properties of isolated carbon nanotubes and carbon nanotube-based composites"
    Alireza Nikfarjam, Roham Rafiee, Mostapha Taheri
    Polyolefins Journal, Vol. 1, No 4, pp.43-68, 2017
69. "Predicting mechanical properties of fuzzy fiber reinforced composites: radially grown carbon nanotubes on the carbon fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    International Journal of Mechanics and Materials in Design, Vol. 12, No 4, pp.1-12, 2016
70. "The influence of material properties on the aeroelastic behavior of a composite wind turbine blade"
    Roham Rafiee, Mohsen Moradi, Motahareh Khanpour
    Journal of Renewable and Sustainable Energy, Vol. 08, No 8, pp.63305-1, 2016
71. "Evaluating long-term performance of Glass Fiber Reinforced Plastic pipes subjected to internal pressure"
    Roham Rafiee, Behzad Mazhari
    CONSTRUCTION AND BUILDING MATERIALS, Vol. 122, No 122, pp.694-701, 2016
72. "A study on nonlinear vibration behavior of CNT-based representative volume element"
    Majid Jamal-omidi, Mahdi Shayanmehr, Saeed Shokrollahi, Roham Rafiee
    AEROSPACE SCIENCE AND TECHNOLOGY, Vol. 55, No 55, pp.272-281, 2016
73. "On the mechanical performance of glass-fibre-reinforced thermosetting-resin pipes: A review"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 143, pp.151-164, 2016
74. "A Study on Equivalent Spherical Structure of Buckyball-C 60 Based on Continuum Shell Model"
    Majid Jamal-omidi, Mahdi Shayanmehr, Roham Rafiee
    Latin American Journal of Solids and Structures, Vol. 13, No 5, pp.1016-1029, 2016
75. "Simulation of aeroelastic behavior in a composite wind turbine blade"
    Roham Rafiee, Mojtaba Tahani, Mohsen Moradi
    JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS, Vol. 151, No 151, pp.60-69, 2016
76. "Characterizing nanotube–polymer interaction using molecular dynamics simulation"
    Roham Rafiee, Mohammad Mahdavi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 112, pp.356-363, 2016
77. "Advances in Characterization and Modeling of Nanoreinforced Composites"
    Roham Rafiee, Timon Rabczuk, Abbas S. Milani, Konstantinos Tserpes
    Journal of Nanomaterials, Vol. 2016, pp.1-1, 2016
78. "The influence of production inconsistencies on the functional failure of GRP pipes"
    Roham Rafiee, Mehdi Fakoorsaghieh, Hadi Hesamsadat
    STEEL AND COMPOSITE STRUCTURES, Vol. 19, No 6, pp.1369-1379, 2015
79. "Simulation of the long-term hydrostatic tests on Glass Fiber Reinforced Plastic pipes"
    Roham Rafiee, Behzad Mazhari
    COMPOSITE STRUCTURES, Vol. 136, No 136, pp.56-63, 2015
80. "Modeling creep in polymeric composites: Developing a general integrated procedure"
    Roham Rafiee, Behzad Mazhari
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, Vol. 99, No 99, pp.112-120, 2015
81. "Molecular dynamics simulation of defected carbon nanotubes"
    Roham Rafiee, Mohammad Mahdavi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. x, No 1, pp.1-9, 2015
82. "Stochastic analysis of functional failure pressures in glass fiber reinforced polyester pipes"
    Roham Rafiee, Farshid Reshadi, Saied Eidi
    MATERIALS & DESIGN, Vol. 67, No 2015, pp.422-427, 2014
83. "Multi-scale modeling of carbon nanotube reinforced polymers using irregular tessellation technique"
    Roham Rafiee, Vahid Firouzbakht
    MECHANICS OF MATERIALS, Vol. 78, No 78, pp.74-84, 2014
84. "Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters"
    Nam Vu-bac, Roham Rafiee, Xiaoyang Zhuang, Tomb Lahmer, Timon Rabczuk
    COMPOSITES PART B-ENGINEERING, Vol. 68, No 68, pp.446-464, 2014
85. "Preface to the Special issue Computational modeling of polymeric composites"
    Timon Rabczuk, Roham Rafiee, Xiaoying Zhuang
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
86. "The Influence of CNT Contents on the Electrical and Electromagnetic Properties of CNT/Vinylester"
    Roham Rafiee, Mohammad Hossein Sabour, Alireza Nikfarjam, Mostapha Taheri
    JOURNAL OF ELECTRONIC MATERIALS, Vol. 43, No 9, pp.3477-3485, 2014
87. "Simulation of functional failure in GRP mortar pipes"
    Roham Rafiee, Farshid Reshadi
    COMPOSITE STRUCTURES, Vol. 113, No 113, pp.155-163, 2014
88. "Predicting Young’s Modulus of Aggregated Carbon Nanotube Reinforced Polymer"
    Roham Rafiee, Vahid Firouzbakht
    Mechanics of Advanced Composite Structures, Vol. 1, No 1, pp.9-16, 2014
89. "Evaluating the influence of defects on the Young’s modulus of carbon nanotubes using stochastic modeling"
    Roham Rafiee, Reza Pourazizi
    JOURNAL OF MATERIALS RESEARCH, Vol. 17, No 3, 2014
90. "Modeling and experimental evaluation of functional failure pressures in glass fiber reinforced polyester pipes"
    Roham Rafiee, Ali Amini
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
91. "Influence of CNT functionalization on the interphase region between CNT and polymer"
    Roham Rafiee, Reza Pourazizi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, No 96, 2014
92. "Uncertainties propagation in metamodel-based probabilistic optimization of CNT/polymer composite structure using stochastic multi-scale modeling"
    Hamid Ghasemi, Roham Rafiee, Xiaoying Zhuang, Jacob Muthu, Timon Rabczuk
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 85, No 85, pp.295-305, 2014
93. "On the modeling of carbon nanotubes: A critical review"
    Roham Rafiee, Reza Maleki Moghadam
    COMPOSITES PART B-ENGINEERING, Vol. 56, No 56, pp.435-449, 2014
94. "Aeroelastic investigation of a composite wind turbine blade"
    Roham Rafiee, Mehdi Fakoorsaghieh
    WIND AND STRUCTURES, Vol. 17, No 6, pp.671-680, 2013
95. "Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion"
    Mehdi Fakoorsaghieh, Roham Rafiee
    STRENGTH OF MATERIALS, Vol. 45, No 3, pp.378-385, 2013
96. "Preface to special issue Theoretical and Experimental Characterization of Composites"
    Roham Rafiee, Mojtaba Haghighi Yazdi
    International Journal of Composite Materials, Vol. 3, 2013
97. "Influence of carbon nanotube waviness on the stiffness reduction of CNT/polymer composites"
    Roham Rafiee
    COMPOSITE STRUCTURES, Vol. 97, pp.304-309, 2013
98. "Experimental and theoretical investigations on the failure of filament wound GRP pipes"
    Roham Rafiee
    COMPOSITES PART B-ENGINEERING, Vol. 45, No 1, pp.257-267, 2013
99. "Challenges of the Modeling Methods for Investigating the Interaction between the CNT and the Surrounding Polymer"
    Roham Rafiee, Timon Rabczuk, Reza Pourazizi, Junhua Zhao, Yancheng Zhang
    Advances in Materials Science and Engineering, Vol. 2013, No 2013, pp.1-10, 2013
100. "Modeling, Characterization, and Processing of Advanced Composites"
     Philip Harisson, Abbas S. Milani, Roham Rafiee
     Advances in Materials Science and Engineering, Vol. 2013, No 2013, pp.1-2, 2013
101. "Apparent hoop tensile strength prediction of glass fiber - reinforced polyester pipes"
     Roham Rafiee
     JOURNAL OF COMPOSITE MATERIALS, Vol. 47, No 1, 2013
102. "Transition Angle a Novel Concept for Predicting the Failure Mode in Orthotropic Materials"
     Mehdi Fakoorsaghieh, Roham Rafiee
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. 1, No 1, 2012
103. "Modal analysis of carbon nanotube reinforced polymer using multi - scale finite element method"
     Abdolhossain Fereydon, Roham Rafiee, Reza Maleki Moghadam
     MECHANICS OF COMPOSITE MATERIALS, Vol. 5, No 2, pp.225-232, 2012
104. "Simulation of Impact and Post - impact Behavior of Carbon Nanotube Reinforced Polymer Using Multi - scale Finite Element Modeling"
     Roham Rafiee, Reza Maleki Moghadam
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 63, No 63, pp.261-268, 2012
105. "Development of Full Range Multi-scale Model to Obtain Elastic Properties of CNT/Polymer Composites"
     Mahmoud Mehrdad Shoukrie, Roham Rafiee
     IRANIAN POLYMER JOURNAL, Vol. 21, pp.397-402, 2012
106. "Influence of non - bonded interphase on crack driving force in carbon nanotube reinforced polymer"
     Roham Rafiee, Abdolhossein Fereydun , Meghdad Heiydar Haei
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 56, pp.25-28, 2012
107. "Investigation of chirality and diameter effects on the Youngs modulus of carbon nanotubes using non - linear potentials"
     Roham Rafiee, Meghdad Heidarhaeib
     COMPOSITE STRUCTURES, Vol. 94, No 8, pp.2460-2464, 2012
108. "Theoretical and experimental investigation of nanocomposite filament strength"
     Roham Rafiee, هیراد عموحاجی
     Journal of Sciences and Technology of Composites, Vol. 11, No 1, 2024
109. "Reliability Analysis of Failure in Composite Pressure Vessels"
     Roham Rafiee, Sahar Bazargani
     Journal of Manufacturing Engineering, Vol. 8, No 4, pp.50-61, 2021
110. "Extension of Maximum Tensile Stress Criterion to Mixed Mode Fracture of Orthotropic Materials Considering T-stress"
     Shahab Zare hosseinabadi, Mehdi Fakoorsaghieh, Roham Rafiee
     Mechanical Engineering modares, Vol. 17, No 10, pp.292-300, 2017
111. "Modeling creep in long fiber reinforced laminated composites using micromechanical rules"
     Roham Rafiee, Behzad Mazhari
     Journal of Sciences and Technology of Composites, Vol. x, 2017
112. "Characterization of the electrical and electromagnetic properties of CNT-based Nanocomposites"
     Alireza Nikfarjam, Roham Rafiee, Mohammad Hossein Sabour, Mostapha Taheri
     Mechanical Engineering modares, Vol. 13, No 12, pp.88-100, 2014
113. "The effects of structural defects on the mechanical properties of CNT"
     Roham Rafiee, Reza Pourazizi
     Mechanical Engineering modares, Vol. 13, No 13, pp.165-175, 2014
114. "Nonlinear vibration analysis of CNT using perturbation technique"
     Roham Rafiee
     Mechanical Engineering modares, Vol. 12, No 3, 2012

Conference Paper

1. "The Role of Applied R&D in The Industrial Production of Competitive Composite Pipes"
   Roham Rafiee
   International Conference and Exhibition on Reinforced Plastics (ICERP2025), 2025
2. "On the long-term behavior of composite pipes"
   Roham Rafiee
   The 9th International Conference on Composites: Characterization, Fabrication and Application (CCFA9), 2024
3. "Integrated Platform for Design, Analysis and Optimization of Composite Pipes"
   Roham Rafiee
   International Conference on Materials Physics and Composites (ICMPC 2024), 2024
4. "On the development of industrial-scale composite pipes"
   Roham Rafiee
   4th International Conference on Applied Mechanics and Mechanical Engineering (ICAMME), 2023
5. "Predicting mechanical properties of 3D-printed polymeric nanocomposites using stochastic modeling"
   Mohammad Reza Amini, Hadis Zehtabzadeh, Roham Rafiee
   26h International Conference on Composite Structures, 2023
6. "Predicting burst pressure of a Type III hydrogen pressure vessels using multi-scale modeling"
   Roham Rafiee, Amirhesam Salehi
   International Conference on Basic Sciences, Engineering and Technology, 2021
7. "On the Simulating CNT-Polymer Interaction Using Different Approaches"
   Roham Rafiee
   2nd Intl. Conference on Nanotechnology & Nanoscience, 2021
8. "Theoretical and experimental study of long-term creep in multilayered composites"
   Roham Rafiee, Amin Ghorbanhosseini
   Data Driven Computing and Machine Learning in Engineering, 2019
9. "Developing a Novel Formulation for Predicting Young's Modulus of CNT Reinforced Polymers Using Stochastic Multi-Scale Modeling"
   Roham Rafiee
   International Conference on Chemical Physics and Materials Science (ICCPMS19), 2019
10. "Stochastic determination of failure in filament wound composite tubes"
    Roham Rafiee, Mohammadali Torabi
    International conference on mechanics of composites (MECHCOMP2019), 2019
11. "Predicting Young's modulus of graphene reinforced polymers"
    Roham Rafiee, Amirali Eskandriyun
    International Conference on Mechanics of Composites (MechComp2019), 2019
12. "Predicting Young's modulus of aggregated nanoclay reinforced polymers"
    Roham Rafiee, Reza Shahzadi
    8th International Conference on Engineering Failure Analysis, 2018
13. "Evaluating the failure of composite pipes subjected to compressive transverse loading"
    Roham Rafiee, Mohammad Reza Habibagahi
    8th International Conference on Engineering Failure Analysis, 2018
14. "Estimating Young's modulus of Nanoclay Reinforced Polymers Using Stochastic Approach"
    Roham Rafiee, Reza Shahzadi
    12th international conference on Advanced Computational Engineering & Experimenting, 2018
15. "Prediction of burst pressure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    12th International conference in Advanced Computational Engineering and Experimenting, 2018
16. "Simulation of Split-disk Experiment for Determining Hoop Tensile Strength of FRP Pipes"
    Roham Rafiee
    12th International Conference on Advanced Computational Engineering and Experimenting, 2018
17. "Mechanical performance of composite pipes under compressive transverse loading: Analytical and numerical approaches"
    Roham Rafiee, Mohammad Reza Habibagahi
    International Conference on Mechanics of Advanced Materials and Equipment, 2018
18. "Comparing different approaches to simulate CNT and polymer interaction"
    Roham Rafiee, Amin Ghorbanhosseini, Mohammad Mahdavi
    20th International Conference on Composite Structures (ICCS20), 2017
19. "Predicting long-term hydrostatic pressure of GRP mortar pipes"
    Roham Rafiee, Behzad Mazhari
    20th International Conference on Composite Structures (ICCS20), 2017
20. "Predicting mechanical properties of graphene sheets"
    Roham Rafiee, Amirali Eskandriyun
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
21. "Stochastic determination of cnt coated fibers properties"
    Roham Rafiee, Amin Ghorbanhosseini
    Advanced Computational Engineering and Experimenting (ACEX2017), 2017
22. "On the strength of GRP pressure pipes with addition of sand filler"
    Roham Rafiee
    Advanced Computational Engineering and Experimenting (ACEX-2017), 2017
23. "The Influence of Vacancy Defects on The Young’s Modulus of Graphene Sheets"
    Roham Rafiee, Amirali Eskandariyun
    The 5th International Conference on Composites: Characterization, Fabrication and Application (CCFA-5), 2016
24. "On the mechanical properties of CNT grown fibers"
    Roham Rafiee, Amin Ghorbanhosseini
    5th International Conference on Nanomaterials, Nanostructures and Nanoegnineering (ICNNN2016), 2016
25. "Fatigue analysis of composite pipes using progressive damage modeling"
    Roham Rafiee, Fereshteh Eslami
    19th International Conference on Composite Structures (ICCS19), 2016
26. "Modeling graphene sheets using nano-scale continuum mechanics approach"
    Roham Rafiee, Amirali Eskandariyun
    19th International Conference on Composite Structures (ICCS19), 2016
27. "ANALYZING STRUCTURAL BAHAVIOR OF A COMPOSITE WIND TURBINE BLADE USING SIMPLIMED MODELING"
    Roham Rafiee, Motahhare Khanpour
    40th Solid Mechanics Conference (SolMech2016), 2016
28. "Hierarchichal multi-scale modeling of CNT-coated fiber-reinforced laminates"
    Roham Rafiee, Amin Ghorbanhosseini
    40th Solid Mechanics Conference (SolMech2016), 2016
29. "Aeroelastic Instability Analysis of a Composite Wind Turbine Blade"
    Roham Rafiee, Mohsen Moradi
    18th International Conference on Composite Structures (ICCS18), 2015
30. "On The Long-term Behavior of Glass Fiber Reinforced Polyester Pipes"
    Roham Rafiee, Behzad Mazhari
    18th International Conference on Composite Structures, 2015
31. "Predicting Mechanical Properties of Fuzzy Fiber"
    Roham Rafiee, Amin Ghorbanhosseini
    18th International Conference on Composite Structures (ICCS18), 2015
32. "A Method for Predicting Long Term Creep and Creep Failure in GRP Pipes"
    Roham Rafiee, Behzad Mazhari
    1st International Conference on Composite Pipes, Vessels & Tanks (CPVT), 2015
33. "Investigating inconsistencies of discontinuous filament winding process on functional failure pressures of GRP pipes"
    Roham Rafiee
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
34. "Predicting functional failure pressures in GRP and GRP Mortar pipes"
    Roham Rafiee, Hadi Hesamsadat
    1st international conferene on Composite Pipes, Tanks and Vessels (CPVT), 2015
35. "Simulation of long-term behavior in composite pipes"
    Roham Rafiee, Behzad Mazhari
    The 4th International Conference on Composites: Characterization, Fabrication and Application (CCFA-4), 2014
36. "A novel formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    first international conference on mechanics of composites, 2014
37. "Investigation of Functional Failure of Composite Pipes"
    Roham Rafiee, Hadi Hesamsadat
    first international conference on mechanics of composites, 2014
38. "Predicting functional failure pressures in filament wound GRP mortar pipes"
    Roham Rafiee, Farshid Reshadi, Ali Amini
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
39. "On the meso-scale modeling of carbon nanotube reinforced polymer"
    Roham Rafiee, Vahid Firouzbakht
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
40. "Stochastic determination of functional failure pressures in FRP pipes"
    Roham Rafiee, Hadi Hesamsadat
    The Bi-Annual Conference on Experimental Solid Mechanics (X-MECH2-14), 2014
41. "Hoop tensile strength prediction of filament wound mortar pipes"
    Roham Rafiee
    ICCS17, 2013
42. "On the mechanical properties of defected graphene sheets and CNTs"
    Roham Rafiee, Reza Pourazizi
    ICCS17, 2013
43. "Evaluation of the electrical and electromagnetic properties of CNT-based composites"
    Roham Rafiee, Mohammad Hossein Sabour, Alireza Nikfarjam, Mostafa Taheri
    ICCS17, 2013
44. "Numerical Study of Heat Transfer for an External Natural Convection Using Cu/water and CuO/water"
    Alibakhsh Kasaeian, Shiva Nasiri, Sassan Mohaseb, Roham Rafiee
    The seventh MIT Conference on Computational Fluid and Solid Mechanics, 2013
45. "Failure analysis of GRP pipes under internal pressure"
    Roham Rafiee
    CCFA-3, 2012
46. "MULTI-SCALE MODELING OF IMPACT BEHAVIOR OF CARBON NANOTUBE REINFORCED POLYMER"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering (ICCE-20, 2012
47. "NUMERICAL MODAL ANALYSIS OF AN EMBEDDED CARBON NANOTUBE IN A POLYMER MATRIX"
    Roham Rafiee, Reza Maleki Moghadam
    20th Annual International Conference on Composites or Nano Engineering, 2012
48. "INVESTIGATION OF STRAIN ENERGY RELEASE RATE IN CARBON NANOTUBE-BASED COMPOSIETS"
    Roham Rafiee, Seyed Meghdad Heydarhaie
    Mechanics of Nano Micro and Macro Composite Structures, 2012
49. "ON THE REINFORCEMENT EFFICIENCY OF WAVY CARBON NANOTUBES"
    Roham Rafiee
    Mechanics of Nano Micro and Macro Composite Structures, 2012
50. "Progressive failure analysis of GRP pipes: Modeling and experimental evaluation"
    Roham Rafiee
    The International Conference on Experimental Solid Mechanics and Dynamics (X-Mech-2012, 2012
51. "Development of a stochastic simulation to predict elastic properties of carbon nanotube reinforced composites"
    Mahmood M. Shokrieh, Roham Rafiee
    International Conference on Composite Structure (ICCS16, 2011
52. "Youngs Modulus Prediction of Carbon Nanotubes Using Full Nonlinear Interatomic Potentials"
    Roham Rafiee, Meghdad Heydarhaei
    16th International Conference on Composite Structures (ICCS16, 2011
53. "Experimental investigation and prediction of strength of 3D-printed nanocomposite specimens"
    Roham Rafiee, هیراد عموحاجی
    The 4th Conference on Application of Composites in Iran Industries, 2025
54. "Investigating mechanical behavior of composite pipes and verssels under internal pressure using analytical and numerical methods"
    Roham Rafiee, علی شاهچراغی
    The 4th Conference on Application of Composites in Iran Industries, 2025
55. "Stress analysis of composite cylinders under external pressure"
    Roham Rafiee, پریوش رضازاده
    The 4th Conference on Application of Composites in Iran Industries, 2025
56. "Calculating Dynamic Fracture toughness of polymers and polymeric nanocomposites under various strain rates"
    Reza Yazdanparast, Roham Rafiee
    22nd International Conference of Iranian Aerospace Society, 2024
57. "A rate dependent nonlinear VE-VP material model for Epon-828 epoxy resin"
    Reza Yazdanparast, Roham Rafiee
    7th national conference on Mech. and Aerospace Eng., 2023
58. "Experimental and theoretical investigations of water absorption in composite pipes under transverse loading"
    Mohammad Naghi Arabian, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
59. "Predicting creep behavior of shor-fiber composites using laminate analogy"
    Ali Ghamarzadeh, Roham Rafiee
    3rd national conference on applications of composites in Iran industries, 2023
60. "On the effects of UV rays of sunlight on the mechanical properties of polymeric composites"
    Roham Rafiee, Amir Hossein Rahimi
    3rd national conference on applications of composites in Iran industries, 2023
61. "Investigating the influence of fiber winding pattern on the burst pressure of Type-III composite pressure vessels"
    Roham Rafiee, [] []
    Int. Conf. on Aerospace, 2022
62. "Developing an optimization procedure of Composite pipes utilized in oil and gas network"
    Roham Rafiee, حسین اسپرسپ
    Int. Conf. of Mech. Eng., 2022
63. "Reliability analysis of a composite pressure vessel"
    Sahar Bazargani, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
64. "Bending analysis of composite gratings using analytical and numerical modeling methods"
    رضا یزدان پرست, Amin Ghorbanhosseini, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
65. "Comparison study on first-ply-failure in composite pressure vessels considering winding pattern"
    Amirhesam Salehi, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
66. "Experimental analysis of creep in a composite pipe under transverse loading"
    Amin Ghorbanhosseini, Roham Rafiee
    2nd national applications of composites in Iran industry, 2020
67. "A new fracture criterion for cracked orthotropic parts under mixed mode I / II loading based on equivalent reinforced isotropic model"
    Mehdi Fakoorsaghieh, Roham Rafiee, Shahab Zare hosseinabadi
    ISME2017, 2017
68. "Comparative study on prediction of the first ply failure in composite pressure vessels"
    Roham Rafiee, Mohammadali Torabi
    Application of Composites in Iran Industries, 2017
69. "Simulation of ring stiffness test on GRP pipes using finite element method"
    Roham Rafiee, Mohammadreza Habibagahi
    Application of Composites in Iran Industries, 2017
70. "Challenges and Applications of Nanocomposites in Various Industries"
    Roham Rafiee, Parsa Sharifi, Amirali Eskandariyun
    Application of Composites in Iran Industries, 2017
71. "Quality Control Process of Composite Pipes: From raw materials to final products"
    Roham Rafiee, Reza Shahzadi
    Application of Composites in Iran Industries, 2017
72. "Predicting mechanical properties of CNT-based nanocomposites using irregular tessellation technique"
    Roham Rafiee, Vahid Firouzbakht
    ISME2016, 2016
73. "Stochastic analysis of Young's modulus of non-defected and defected CNTs using molecular dynamics"
    Roham Rafiee, Mohammad Mahdavi
    14th Conference of Iranian Aerospace Society, 2015
74. "Comparative study on creep modeling methods of polymeric composites"
    Roham Rafiee, Behzad Mazhari
    ISME2014, 2014
75. "Stochastic determination of failure pressure in composite pressure vessels"
    Roham Rafiee, Hadi Hesamsadat
    The 13th Conference of Iranian Aerospace Society (AERO2014), 2014
76. "Developing a formulation for predicting mechanical properties of CNT-based composites"
    Roham Rafiee, Vahid Firouzbakht
    13th conference of Iranian Aerospace Society, 2014
77. "The influence of functionalization on the mechanical properties of CNT-based composites"
    Roham Rafiee, Reza Pourazizi
    13th conference of Iranian Aerospace Society, 2014
78. "Investigation of electrical and electromagnetic properties of CNT-based nanocomposites using in-situ polymerization"
    Roham Rafiee, Alireza Nikfarjam, محمد حسین صبور, مصطفی طاهری
    Aero2013, 2013
79. "Impact analysis of nanocomposites reinforced by CNT using multi-scale finite element method"
    Roham Rafiee, Reza Maleki Moghadam
    ICMEAT2012, 2012
80. "Hoop Tensile Strength Prediction of Glass Fiber Reinforced Polymer Pipes"
    Roham Rafiee
    IranPipeTech2012, 2012
81. "Modal analysis of carbon nanotube based composites using multi-scale finite element modeling"
    Roham Rafiee, Reza Maleki Moghadam
    Aero2012, 2012
82. "Extracting optimum thickness of composite layers to rehabilitate corroded buried steel gas pipe"
    Roham Rafiee
    IranPipeTech2011, 2011
83. "Investigation of CNT diameter and chirality effect on Young's modulus using non-linear finite element model"
    Roham Rafiee, Seyed Meghdad Heydarhaie, Abdolhossain Fereydon
    ISME2011, 2011