menu
Shahram Raygan

Professor

Update: 2025-05-01

Shahram Raygan

College of Engineering / Metallurgy and Materials Engineering

Journal Paper

  1. "Effect of niobium addition on the microstructure, transformation temperatures, and shape memory effect of Cu-Al-Ni-Ti shape memory alloys"
    Arya Mohammadzadeh, Shahram Raygan
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 931, 2025
  2. "Two-stage kinetics study of cadmium dissolution from Cd–Ni filter cake with sulfuric acid"
    yasaman kaffash, Shahram Raygan, Mehdi Pourabdoli, Vahid Aghaei Lashgari
    Mineral Processing and Extractive Metallurgy-Transactions of the Institutions of Mining and Metallurgy, Vol. 134, No 1, pp.43-51, 2025
  3. "Unraveling the role of subcritical annealing time before intercritical annealing of a cold-worked Ni-Cr-Mo-V alloy steel: Phase transformations and mechanical properties"
    farzad badkoobe, Shahram Raygan, Jafar Rasi Zadeh Ghani, Tae-Yang Kwak, Bong-Hwan Kim, Avanish Kumar Chandan, Gaurav Kumar Bansal
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 1010, 2025
  4. "Developing advanced high strength Ni-Cr-Mo-V steels with a superlative strength-elongation-toughness synergy through different processing routes"
    farzad badkoobe, Shahram Raygan, Jafar Rasi Zadeh Ghani, Tae-Yang Kwak, Bong-Hwan Kim
    MATERIALS CHARACTERIZATION, Vol. 218, 2024
  5. "Investigating layer-by-layer chitosan-dextran sulfate-coated mesoporous silica as a pH-sensitive drug delivery system"
    Mohammadreza hooshyar, Shahram Raygan, Rouhollah Mehdinavaz Aghdam
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, Vol. 35, 2024
  6. "A damage-tolerant hybrid aluminum composite reinforced with carbon nanotube and zirconia: study of strengthening mechanisms by combined experiments and molecular dynamics simulations"
    Saeid Bahramzadeh, Shahram Raygan
    ADVANCED COMPOSITE MATERIALS, Vol. 33, No 6, pp.1254-1277, 2024
  7. "Optimization of waste zinc filter cake dissolution by Taguchi method and separating cadmium from nickel by precipitation"
    yasaman kaffash, Shahram Raygan, Mehdi Pourabdoli, Vahid A. Lashgari
    CHEMICAL PAPERS, Vol. 78, pp.3545-3556, 2024
  8. "An Investigation on Hot Corrosion Behavior of Al0.4MnCrCoFeNi High Entropy Alloy in Different Molten Salts at 750 °C"
    Adele Familifard, Ahmadali Amade, Shahram Raygan, Reza Gholamipour
    Materials Today Communications, Vol. 38, No 108368, 2024
  9. "Mechanical performance of CNT-reinforced aluminum matrix composite fabricated via flake powder metallurgy: Experimental modeling and molecular dynamics study"
    Saeid Bahramzadeh, Shahram Raygan
    DIAMOND AND RELATED MATERIALS, Vol. 142, No 2, 2023
  10. "Influence of magnetite concentrate morphology on oxidation and sintering rates of pellet during induration"
    Hossein Elahidoost, Saeed Sheibani, Shahram Raygan, Leila Hosseini, Ali Dehghani Ahmadabadi, Nader Esmaeili
    Journal of Materials Research and Technology-JMR&T, Vol. 26, No 1, pp.7116-7126, 2023
  11. "Direct Synthesis of Tungsten Carbide by Solid-State Carbothermic Reduction of Tungsten Trioxide"
    Mojtaba Baigi, Mahdi Pourabdoli, Shahram Raygan, Hossein Abdizadeh
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 76, No 12, pp.3455-3461, 2023
  12. "The role of Al on microstructure and high-temperature oxidation behavior of AlxMnCrCoFeNi (x = 0, 0.2, 0.4, 1) high-entropy alloys"
    adele Familifard, Ahmadali Amade, Shahram Raygan, Reza Gholamipour
    JOURNAL OF MATERIALS RESEARCH, Vol. 38, No 5, pp.1197-1210, 2023
  13. "Mechanism of magnetite iron ore concentrate morphology affecting the pellet induration process"
    Hossein Elahidoost, Saeed Sheibani, Shahram Raygan, Leila Hosseini, Nader Esmaeili
    ADVANCED POWDER TECHNOLOGY, Vol. 33, No 12, 2022
  14. "Study of silver extraction from Ag2S containing concentrate in the presence of copper sulfate, sodium thiosulfate, sodium metabisulfite, and ascorbic acid"
    seyed Hadi BaniJamali, Shahram Raygan, Ahmadali Amade
    MINERALS ENGINEERING, Vol. 183, No 6, 2022
  15. "Leaching behavior of silver sulfide in the sodium thiosulfate-copper sulfate- sodium metabisulfite system"
    seyed Hadi BaniJamali, Shahram Raygan, Ahmadali Amade
    MINERALS ENGINEERING, Vol. 174, No 12, 2021
  16. "Increased coercivity in recalcined barium ferrite–magnetite nanocomposites"
    Mohammadjafar Molaei, Abolghasem Ataei, Shahram Raygan
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, Vol. 112, No 5, 2021
  17. "Low-carbon cast microalloyed steel intercritically heat-treated at different temperatures: microstructure and mechanical properties"
    Hadi Torkamani, Shahram Raygan, Carlos Garcia Mateo, Yahya Palizdar, Jafar Rasi Zadeh Ghani, Javier Vivas, David San Martin
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 21, No 2, pp.1-16, 2021
  18. "Beneficiation of an Oolitic-Iron Ore by Magnetization Roasting and magnetic separation"
    [] [], Shahram Raygan
    Iranian Journal of Materials Science and Engineering, Vol. 18, No 3, pp.27-39, 2020
  19. "Investigation of dehydrogenation performance and air stability of MgH2–PMMA nanostructured composite prepared by direct high-energy ball-milling"
    Mahsa Rafatnejad, Shahram Raygan, Mohammad Sefidmooy Azar
    Materials for Renewable and Sustainable Energy, Vol. 9, No 2, pp.1-12, 2020
  20. "Effect of chemical activation process on adsorption of As(V) ion from aqueous solution by mechano-thermally synthesized zinc ferrite nanopowder"
    Mohammad Sefidmooy Azar, Shahram Raygan, Saeed Sheibani
    International Journal of Minerals Metallurgy and Materials, Vol. 27, No 4, pp.526-537, 2020
  21. "Capabilities of nickel zinc ferrite and its nanocomposite with CNT for adsorption of arsenic (V) ions from wastewater"
    Amin Ahangari Asl, Shahram Raygan, Abolghasem Ataei
    Journal of Environmental Chemical Engineering, Vol. 7, No 6, 2019
  22. "Synthesis of Ni–TiC Composite by Ball Milling and Heat Treatment of NiO/TiO2/C Powder Mixture"
    hamid ghiasi, Shahram Raygan
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, Vol. 73, No 1, pp.81-92, 2019
  23. "Effect of adding Ti and rare earth elements on properties of Cu-14Al-4Ni shape memory alloy"
    pegah Dalvand, Shahram Raygan, Gabriel Lopez, Volodymyr Chernenko
    Materials Research Express, Vol. 6, No 11, 2019
  24. "Effect of Aging on the Structure and Transformation Behavior of Cu–12Al–3.5Ni–0.7Ti–0.05RE High Temperature Shape Memory Alloy"
    pegah Dalvand, Shahram Raygan, Gabriel Lopez, Mariano Melendez, Volodymyr Chernenko
    METALS AND MATERIALS INTERNATIONAL, Vol. 26, No 9, pp.1354-1365, 2019
  25. "Properties of rare earth added Cu–12wt%Al–3wt%Ni–0.6wt%Ti high temperature shape memory alloy"
    pegah Dalvand, Shahram Raygan, Gabriel Lopez, Mariano Melendez, Volodymyr Chernenko
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 754, No 4, pp.370-381, 2019
  26. "Tensile Behavior of Normalized Low Carbon Nb-microalloyed Steel in the Presence of Rare Earth Elements"
    Hadi Torkamani, Shahram Raygan, Carlos Garcia Mateo, Jafar Rasi Zadeh Ghani, Yahya Palizdar, David San-martin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 749, No 749, pp.56-64, 2019
  27. "The effect of different carbon reducing agents in synthesizing barium ferrite/magnetite nanocomposites"
    محمد جعفر مولایی, Abolghasem Ataei, Shahram Raygan, S.J. Picken
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 219, pp.155-161, 2018
  28. "Evolution of Pearlite Microstructure in Low-Carbon Cast Microalloyed Steel Due to the Addition of La and Ce"
    Hadi Torkamani, Shahram Raygan, Carlos Garcia Mateo, Jafar Rasi Zadeh Ghani, Yahya Palizdar, David San-martin
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, Vol. 49, No 10, pp.4495-4508, 2018
  29. "Properties of activated MgH2 + mischmetal nanostructured composite produced by ball-milling"
    Mohammad Amin Rahmani Nasab, Shahram Raygan, Hossein Abdizadeh, مهدی پورعبدلی سردرود, Seyyed Hamed Mirghaderi
    Materials for Renewable and Sustainable Energy, Vol. 7, No 3, pp.1-11, 2018
  30. "Contributions of Rare Earth Element (La,Ce) Addition to the Impact Toughness of Low Carbon Cast Niobium Microalloyed Steels"
    Hadi Torkamani, Shahram Raygan, Carlos Garcia Mateo, Jafar Rasi Zadeh Ghani, Yahya Palizdar, David San-martin
    METALS AND MATERIALS INTERNATIONAL, Vol. 24, No 4, pp.773-788, 2018
  31. "Using response surface methodology to optimize the operating parameters in a top-spray fluidized bed coating system"
    Seyed Hadi Seyedin, Mahdi Arjmand, Ali Akbar Safekordi, Shahram Raygan, Ehsan Zhalehrajabi, Nejat Rahmanian
    SURFACE & COATINGS TECHNOLOGY, Vol. 334, No 1, pp.43-49, 2018
  32. "The Influence of La and Ce Addition on Inclusion Modification in Cast Niobium Microalloyed Steels"
    Hadi Torkamani, Shahram Raygan, Carlos Garcia Mateo, Jafar Rasi Zadeh Ghani, Javier Vivas, Yahya Palizdar, David San-martin
    Metals, Vol. 7, No 9, 2017
  33. "effects of Mo addition on the microstructure and mechanical properties of cast microalloyed steel"
    Hadi Torkamani, Homaan Rashvand, Shahram Raygan, Jafar Rasi Zadeh Ghani, Yahya Palizdar, Carlos Garcia Mateo, David San-martin
    Iranian Journal of Materials Science and Engineering, Vol. 14, No 3, pp.76-85, 2017
  34. "Leaching of nickel from a secondary source by sulfuric acid"
    Seyed Abolfazl Hosseini, Shahram Raygan, Ahmad Rezaei, Ali Jafari
    Vol. 5, No 4, pp.3922-3929, 2017
  35. "Exchange bias in barium ferrite/magnetite nanocomposites"
    Mohammadjafar Molaei, Abolghasem Ataei, Shahram Raygan, S.J. Picken
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 123, No 6, pp.1-8, 2017
  36. "Application of response surface methodology for modelling of TiC coating on AISI D2 steel using a mechanical milling technique"
    Farhad Saba, Shahram Raygan
    POWDER METALLURGY, Vol. 60, No 4, pp.280-292, 2017
  37. "Experimental Investigation and CFD Simulation of Top Spray Fluidized Bed Coating System"
    Seyed Hadi Seyedin, Mahdi Arjmand, Ali Akbar Safekordi, Shahram Raygan
    PERIODICA POLYTECHNICA-CHEMICAL ENGINEERING, Vol. 61, No 2, pp.117-127, 2017
  38. "Removal of Cadmium and Lead Ions from Aqueous Solution by Nanocrystalline Magnetite Through Mechanochemical Activation"
    Mohsen Hosseinzadeh, Seyed Ali Seyed Ebrahimi, Shahram Raygan, سیدمرتضی مسعود پناه
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 49, No 2, pp.72-79, 2016
  39. "Investigating Selective Removal of Cr(VI) and Zinc Ions from Aqueous Media by Mechanical-chemical Activated Red Mud"
    Noras Ghanbarpourabdoli, Shahram Raygan, Hossein Abdizadeh
    Iranian Journal of Materials Science and Engineering, Vol. 13, No 4, pp.20-32, 2016
  40. "The synergistic effect of catalysts on hydrogen desorption properties of MgH2–TiO2–NiO nanocomposite"
    Farshad Rajabpour, Shahram Raygan, Hossein Abdizadeh
    Materials for Renewable and Sustainable Energy, Vol. 5, No 4, pp.1-9, 2016
  41. "Study of novel mechano-chemical activation process of red mud to optimize nitrate removal from water"
    Abolghasem Alighardashi, Hamidreza Gharibi, Shahram Raygan, Abbas Akbarzadeh
    WATER SCIENCE AND TECHNOLOGY, Vol. 73, No 4, pp.899-908, 2016
  42. "Mechanothermal reduction of Hematite and Anatase mixture by two different forms of carbon as reductant for in-situ production of Fe-TiC nanocrystalline composite"
    Samaneh Niksirat, Shahram Raygan, Sara Moradi Ghaissabadi
    Iranian Journal of Materials Science and Engineering, Vol. 12, No 2, pp.56-70, 2015
  43. "Effect of process control agents on synthesizing nano-structured 2Mg–9Ni–Y catalyst by mechanical milling and its catalytic effect on desorption capacity of MgH2"
    Faranak Hosseini Gorajobi, Mehdi Pourabdoli, D Uner, Shahram Raygan
    ADVANCED POWDER TECHNOLOGY, Vol. 26, No 2, pp.448-453, 2015
  44. "Role of intensive milling in the processing of barium ferrite/magnetite/iron hybrid magnetic nano-composites via partial reduction of barium ferrite"
    Mohammad Mahdi Molaie, Abolghasem Ataei, Shahram Raygan, S.J. Picken
    MATERIALS CHARACTERIZATION, Vol. 101, No 101, 2015
  45. "Role of intensive milling on microstructural and physical properties of Cu80Fe20/10CNT"
    Mahsa Barzegar, Abolghasem Ataei, Shahram Raygan, رضا پیکان
    Journal of Ultrafine Grained and Nanostructured Materials, Vol. 47, No 1476, pp.37-42, 2014
  46. "kinetics studies for gold leaching of a refractory sulfide concentrate by chloride-hypochlorite solution"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    Iranian Journal of Materials Science and Engineering, Vol. 11, No 2, pp.37-47, 2014
  47. "Simultaneous carbothermic reduction of iron and titanium oxides to produce an iron-based composite by mechanically activated sintering method"
    Samaneh Niksirat, Shahram Raygan
    ADVANCED POWDER TECHNOLOGY, Vol. 25, No 3, pp.859-864, 2014
  48. "Chloride–hypochlorite leaching and hydrochloric acid washing in multi-stages for extraction of gold from a refractory concentrate"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    HYDROMETALLURGY, Vol. 142, No 142, 2014
  49. "Comparing microstructure and mechanical properties of AISI D2 steel after bright hardening and oil quenching"
    Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani
    MATERIALS & DESIGN, Vol. 54, No 54, pp.1049-1055, 2014
  50. "The influence of alkaline salt bath quenching on the microstructure and mechanical properties of AISI D2 steel"
    Ahmad Malekan, Ali Pedram, Shahram Raygan, Jafar Rasi Zadeh Ghani, Mehdi Malekan
    CANADIAN METALLURGICAL QUARTERLY, Vol. 53, No 1, pp.88-92, 2014
  51. "Effect of Powder Particle Size and Substrate Hardening on the Formation of Nanostructured TiC Coating on AISI-D2 Steel by Mechanical Milling"
    Farhad Saba, Shahram Raygan, Hossein Abdizadeh
    Advanced Materials Research, Vol. 829, No 829, pp.471-475, 2013
  52. "Comparison of Cyanide and Chloride-Hypochlorite Leaching of a Ball Milled Refractory Gold Concentrate with Ultra-Fine Particles"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    Advanced Materials Research, Vol. 829, No 829, pp.869-873, 2013
  53. "A comparative study for synthesis methods of nano-structured (9Nie2MgeY) alloy catalysts and effect of the produced alloy on hydrogen desorption properties of MgH2"
    Mahdi Pourabdoli, Shahram Raygan, Hossein Abdizadeh, D Uner
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 38, No 38, pp.16090-16097, 2013
  54. "Influence of thermomechanical treatment on microstructure and properties of electroslag remelted Cu–Cr–Zr alloy"
    Mojgan Kermajani, Shahram Raygan, گاظم حنایی, H. Ghaffari
    MATERIALS & DESIGN, Vol. 51, No 51, pp.688-694, 2013
  55. "Simultaneous sulfide oxidation and gold leaching of a refractory gold concentrate by chloride–hypochlorite solution"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    MINERALS ENGINEERING, Vol. 50-51, pp.140-142, 2013
  56. "Determination of kinetic parameters and hydrogen desorption characteristics of MgH2-10 wt% (9Ni–2Mg–Y) nano-composite"
    Mahdi Pourabdoli, Shahram Raygan, Hossein Abdizadeh, D Uner
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 38, No 27, pp.11910-11919, 2013
  57. "Preparing TiC coating on AISI D2 steel using mechanical milling technique"
    Farhad Saba, Shahram Raygan, Hossein Abdizadeh, Ata Dolatmoradi
    POWDER TECHNOLOGY, Vol. 246, No 246, pp.229-234, 2013
  58. "Production of Cu-Cr-Zr Alloy Using Electroslag Remelting Technique"
    Mojgan Kermajani, Shahram Raygan, گاظم حنایی, H. Ghaffari
    International Journal of Engineering, Vol. 26, pp.713-720, 2013
  59. "Chloride–hypochlorite leaching of gold from a mechanically activated refractory sulfide concentrate"
    Mehdi Ghobeiti Hasab, Shahram Raygan, Fereshteh Rashchi
    HYDROMETALLURGY, Vol. 138, No 138, pp.59-64, 2013
  60. "Mechanical milling of Mg, Ni and Y powder mixture and investigating the effects of produced nanostructured MgNi4Y on hydrogen desorption properties of MgH2"
    Leila Chitsazkhoyi, Shahram Raygan, Mahdi Pourabdoli
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 38, No 16, 2013
  61. "Study of thermomechanical treatment on mechanical - induced phase transformation of NiTi and TiNiCu wires"
    Seyyed Aghamiri Sm , Mahmoud Nili Ahmadabadi, Hamed Shahmir , Fariba Naghdi , Shahram Raygan
    Journal of the Mechanical Behavior of Biomedical Materials, Vol. 21, No 1, pp.32-36, 2013
  62. "The Effects of Volatile Materials of Non-coking Coal on the Reduction of Hematite"
    امید گنجی, Shahram Raygan, جلیل وحدتی خاکی
    International Journal of Iron and Steel Society of Iran, Vol. 10, No 1, pp.23-26, 2013
  63. "Mechanochemical synthesis of W–Cu nanocomposites via in-situ co-reduction of the oxides"
    Ata Dolatmoradi, Shahram Raygan, Hossein Abdizadeh
    POWDER TECHNOLOGY, Vol. 233, No 233, pp.208-214, 2013
  64. "Synthesizing Nanostructured Ni75Mg16 . 66Y8 . 34 ( at% ) Powder by Solid State Reaction and Mechanical Milling"
    Shahram Raygan, Mehdi Pourabdoli , Hossein Abdizadeh, Mamoun Medraj
    MATERIALS AND MANUFACTURING PROCESSES, Vol. 27, No 12, pp.1300-1305, 2012
  65. "In Situ Production of Fe - TiC Nanocomposite by Mechanical Activation and Heat Treatment of the Fe2O3/TiO2/C Powder"
    Sara Mokhet, Shahram Raygan
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 21, No 11, pp.2295-2302, 2012
  66. "Effect of cold - working and aging processes on the microstructure, mechanical properties and electrical conductivity of Cu–13.5%Mn–4%Ni–1.2%Ti alloy"
    Hesam Ehsanian , Shahram Raygan, Behzad Amin Forghani , Kazem Hanayi , Farzane Kaseb Ahadi
    MATERIALS & DESIGN, Vol. 41, pp.182-191, 2012
  67. "Mechanochemical synthesis of WCu nanocomposites via in-situ co-reduction of the oxides"
    Ata Dolatmoradi, Shahram Raygan, Hossein Abdizadeh
    POWDER TECHNOLOGY, Vol. 233, 2012
  68. "CHLORIDE – HYPOCHLORITE OXIDATI ON AND LEACHING OF R E FRACTORY SULFIDE GOLD CONCENT RATE"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    Physicochemical Problems of Mineral Processing, Vol. 49, No 1, pp.61-70, 2012
  69. "Production of Nanocrystalline Magnetite for Adsorption of Cr ( VI ) Ions"
    Nazanin Javadi , Shahram Raygan, Seyed Ali Seyed Ebrahimi
    international journal of modern physics, Vol. 5, No 1, pp.771-783, 2012
  70. "The effect of heat treatment and re - calcination on magnetic properties of BaFe12O19/Fe3O4 nano - composite"
    Mohammad Jafar Molaei , Abolghasem Ataei, Shahram Raygan, S J Picken , F D Tichelaar
    CERAMICS INTERNATIONAL, Vol. 38, No 4, pp.3155-3159, 2012
  71. "Magnetic property enhancement and characterization of nano - structured barium ferrite by mechano - thermal treatment"
    Mohammad Javad Molaei , Abolghasem Ataei, Shahram Raygan, Mohammad Reza Rahimipour , S J Picken , F D Tichelaar , E Legarra , F Plazaola
    MATERIALS CHARACTERIZATION, Vol. 63, pp.83-89, 2012
  72. "Effect of rolling and annealing processes on the hardness and electrical conductivity values of Cu13.5Mn4Ni alloy"
    Shahram Raygan, Ehsanian Mofrad Hesam , Pourabdoli Mahdi , Kaseb Ahadi Farzaneh
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 211, No 11, pp.1810-1816, 2011
  73. "Synthesis and characterization of BaFe12O19 / Fe3O4 and BaFe12O19 / Fe / Fe3O4 magnetic nano - composites"
    Mohamad Javad Molaei , Abolghasem Ataei, Shahram Raygan, S J Picken , E Mendes , F D Tichelaar
    POWDER TECHNOLOGY, Vol. 221, pp.292-295, 2011
  74. "AN INVESTIGATION INTO MECHANOCHEMICAL SYNTHESIS OF NANOCRYSTALLINE HEXAFERRITE POWDER"
    Somaye Sadeghi Niaraki , Seyed Ali Seyyed Ebrahimi , Shahram Raygan
    INTERNATIONAL JOURNAL OF MODERN PHYSICS B, Vol. 25, No 7, pp.987-993, 2011
  75. "Corrosion resistance improvement in Gas Tungsten Arc Welded 316L stainless steel joints through controlled preheat treatment"
    Hamid Reza Zarei Rajani , Hadi Torkamani , Mohammad Sharnati , Shahram Raygan
    MATERIALS & DESIGN, Vol. 34, No 34, pp.51-57, 2011
  76. "The Chlorination Kinetics of Zirconium Dioxide Mixed With Carbon Black"
    Ali Movahedian , Shahram Raygan, Mehdi Pourabdoli
    THERMOCHIMICA ACTA, Vol. 512, pp.93-97, 2011
  77. "Investigation on the Effects of Milling Atmosphere on Synthesis of Barium Ferrite/Magnetite Nanocomposite"
    Mohammad Javad Molaei , Abolghasem Ataei, Shahram Raygan, S J Picken
    Journal of Superconductivity and Novel Magnetism, Vol. 25, No 2, pp.519-524, 2011
  78. "The Effect of High Energy Milling on the Sr - Hexaferrite Nanocrystalline Powder Synthesized by a Sol - Gel Autocombustion Method"
    Somaye Sadeghi Niaraki , Seyed Ali Seyed Ebrahimi, Shahram Raygan
    INTERNATIONAL JOURNAL OF MODERN PHYSICS C, Vol. 5, No 1, pp.765-770, 2011
  79. "Effect of mechanical activation on the production of SiC from silica sand"
    Babak Kondori , Hammid Mohammadi Yengijeh , Shahram Raygan
    International Journal of Refractory Metals and Hard Materials, Vol. 29, No 1, pp.10-13, 2011
  80. "Heat treatment of mechano - chemically produced BaFe12O19/Fe3O4 magnetic nano - composites"
    Abolghasem Ataei, Shahram Raygan
    Journal of Physics: Conference Series, Vol. 292, No 1, pp.1-5, 2011
  81. "Evaluation of Four Coals for Blast Furnace Pulverized Coal Injection"
    Shahram Raygan, Hossein Abdizadeh , Akbar Eskandari Rizi
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, Vol. 17, No 3, 2010
  82. "The Mechanical and Thermal Behaviors of Heat-Treated Ni-Rich NiTi Orthodontic Archwires"
    seyyed mohammad Seyyed Aghamir, Mahmoud Nili Ahmadabadi, Shahram Raygan, Esmaeil Haririan, M.S. ahmad Akhondi
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 18, pp.843-847, 2009
  83. "An Investigation on Quenching Performance of Hot Alkaline Bath"
    Shahram Raygan, Jafar Rasi Zadeh Ghani, Masoud Askari
    Journal of ASTM International, Vol. 6, No 1, pp.1-10, 2009
  84. "Effect of cooling rate on the phase transformation behavior and mechanical properties of Ni - rich NiTi shape memory alloy"
    Yahya Motemani , Mahmoud Nili Ahmadabadi, M J Tan , Mandana Bornapour , Shahram Raygan
    JOURNAL OF ALLOYS AND COMPOUNDS, Vol. 469, No 1, pp.164-168, 2009
  85. "Inception of Transformation of Hematite to Magnetite During Mechanical Activation A Thermodynamical Approach"
    Sadeghi Masoud, Shahram Raygan, Seyed Ali Seyed Ebrahimi, Hossein Abdizadeh
    IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY, TRANSCATION B: ENGINEERING, Vol. 33, pp.415-424, 2009
  86. "Influence of talc additive on cold strength and reducibility of iron ore sinters compared to bentonite"
    Shahram Raygan, Hossein Abdizadeh, Ali Dabbagh , Mehdi Pourabdoli
    Ironmaking and Steelmaking, Vol. 36, No 4, pp.273-278, 2009
  87. "Comparison of Microstructure and Surface Properties of AISI 1045 Steel After Quenching in Hot Alkaline Salt Bath and Oil"
    Shahram Raygan, Jafar Rasi Zadeh Ghani, Massoud Askari
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, Vol. 18, No 2, pp.168-173, 2008
  88. "The Effect of Chemical Composition on Microstructure and Transformation Behavior of NiTi Shape Memory Alloy Prepared by Vacuum Arc Melting"
    Mandana Bornapour , Yahya Motemanni , Mahmoud Nili Ahmadabadi, Shahram Raygan
    Journal of Biomimetics, Biomaterials, and Tissue Engineering, Vol. 1, No 1, pp.97-91, 2008
  89. "a new process for the production of ferrotitanium from titania slag"
    Mehdi Pourabdoli , Shahram Raygan, Hossein Abdizadeh, Kazem Hanaei
    CANADIAN METALLURGICAL QUARTERLY, Vol. 1, No 46, pp.24-17, 2007
  90. "comparison of the questin capacities of hot salt and oil baths"
    Jafar Rasi Zadeh Ghani, Shahram Raygan, Massoud Askari
    METAL SCIENCE AND HEAT TREATMENT, Vol. 48, pp.193-198, 2006
  91. "Comparing of the quenching capacities of hot salt and oil bath"
    Jafar Rasi Zadeh Ghani, Shahram Raygan, Masood Askari
    METAL SCIENCE AND HEAT TREATMENT, Vol. 48, No 6, pp.193-198, 2006
  92. "Production of high titania slag by Electro - Slag Crucible Melting ( ESCM ) process"
    Mehdi Pourabdoli , Shahram Raygan, Hossein Abdizadeh, Kazem Hanaei
    INTERNATIONAL JOURNAL OF MINERAL PROCESSING, Vol. 78, No 3, pp.181-175, 2006
  93. "Effect of TiO 2 on Hydrogen Desorption Properties of Al3Mg2"
    nima nazeri, Shahram Raygan, مهدی پورعبدلی سردرود
    Metallurgical Engineering, Vol. 22, No 4, 2020
  94. "The Effect of Boron Addition on the Microstructure, Hardness and Characteristic Temperatures of Cu-12Al-4Ni Memory Alloy Prepared by Mechanical Alloying, Pressing and Rolling"
    Zainab Garrahi, Shahram Raygan, مهدی پورعبدلی سردرود
    Journal of Advanced Materials in Engineering (Esteghlal), Vol. 37, No 4, pp.59-72, 2019
  95. "Effect of Milling and Heat Treatment on the Microstructure of 38wt%TiO2-36wt%NiO-26wt%C and the Influence of Produced Nanostructured Powder Mixtures on the Hydrogen Desorption from MgH2"
    Fateme Mehri, Shahram Raygan, مهدی پورعبدلی سردرود
    metallurgy and materials engineering, Vol. 30, No 1, 2019
  96. "Synthesis of Boron Containing Cu-12Al-4Ni Memory Alloy powder by Using Mechanical Alloying Method and Investigating the Changes of the Density and Porosity in Bulk Samples During Production"
    Zainab Garrahi, Shahram Raygan, مهدی پورعبدلی سردرود
    metallurgy and materials engineering, Vol. 20, No 2, pp.98-108, 2017
  97. "Studying of the Hydriding Properties of MgH2-10 wt. % (38TiO2- 36NiO-26C) Nano-Composite Prepared by Mechanical Milling"
    Fateme Mehri, Shahram Raygan, مهدی پورعبدلی سردرود
    Mateials and advanced technology journal, Vol. 5, No 5, pp.1-9, 2017
  98. "Evaluation of almond shells magnetized by iron nano-particles for nitrate removal from aqueous solution: Study of adsorption isotherm"
    Mohsen Arbabi, Sara Hemati, Shahram Raygan, Morteza Sedehi, Abbas Khodabakhshi, Abdolmagid Fadaei
    Journal of Shahrekord University of Medical Sciences, Vol. 17, No 6, pp.92-102, 2016
  99. "Investigation on the effect of reducing agent on the partial reduction of barium hexaferrite"
    Abolghasem Ataei, Mohammad Mahdi Mowlaie, Shahram Raygan
    Science and Engineering of Ceramics, Vol. 2, No 2, pp.29-40, 2012
  100. "effect of composition and basicity of electrode E310 coating on the recovery and loss of alloying elements in the welding zone"
    F. Teimoory, Ayyub Halvaee, Shahram Raygan, Reza Amirabadi Zadeh
    engineering, Vol. 15, No 47, pp.17-21, 2012
  101. "recovery of INCONEL 738 superalloy from used gas turbine blade by ESR method"
    Ali Farnia, Shahram Raygan, Hossein Abdizadeh, کاظم حنایی
    metallurgy and materials engineering, Vol. 23, No 2, pp.59-66, 2012
  102. "investigation on the effect of hot rolling on the electrical resistivity and high temperature oxidation resistance of Fe-21%Cr-5.3%Al alloy"
    بهزاد امین فرقانی , Shahram Raygan, فرزانه کاسب احدی
    Metallurgical Engineering, Vol. 13, No 39, pp.51-57, 2010
  103. "اثرPH سل اولیه بر مورفولوژی و اندازه ذرات نانوپودر کاربیدسیلیکون سنتز شده به روش سل - ژل"
    احسان اولیائی , Hossein Abdizadeh, Shahram Raygan, حمیدرضا بهاروندی
    Journal of Financial and Management Engineering Exchange, Vol. 12, No 34, pp.50-46, 2009
  104. "اثر pH سل اولیه بر مورفولوژی و اندازه ذرات نانو پودر کاربید سیلیکون ( SiC ) سنتز شده به روش سل - ژل"
    احسان اولیائی , Hossein Abdizadeh, Shahram Raygan, حمیدرضا بهاروندی
    Metallurgical Engineering, Vol. -, No 34, 2009
  105. "بررسی کیفیت چهار نوع زغال داخلی جهت تزریق در کوره بلند"
    اکبر اسکندری ریزی , Hossein Abdizadeh, Shahram Raygan
    Journal of Financial and Management Engineering Exchange, Vol. -, No 30, pp.62-57, 2008
  106. "اثر میزان تالک بر استحکام و احیا پذیری کلوخه های تولیدی ذوب آهن اصفهان"
    علی دباغ , رامز وقار , Hossein Abdizadeh, Shahram Raygan
    University, Vol. 42, No 5, pp.629-636, 2008
  107. "تاثیر ترکیب شیمیایی بر بافت و خواص پخت سختی در فولادهای عاری از عناصر بین نشین"
    متقی آرمان , کریمان مهدی , Shahram Raygan, Mohammad Habibi Parsa, Mahmoud Nili Ahmadabadi, متقی آرمان , کریمان مهدی
    University, Vol. 41, No 8, pp.1095-1102, 2008
  108. "effect of temperature and floe rate of gas on the carbochlorination process of zirconium dioxide"
    کمال صابریان , Shahram Raygan, علی موحدیان , سید احمد حسینی سمنانی
    NUCLEAR SCINCE AND TECHNOLOGY, Vol. 3, No 41, pp.44-49, 2008
  109. "بررسی گوگردزدایی در آلیاژهای نیکل - کروم تولید شده به روش تصفیه الکتریکی توسط سرباره"
    Hossein Abdizadeh, رضاعلی شکری , Shahram Raygan, کاظم حنایی
    Journal of Financial and Management Engineering Exchange, Vol. 8, No 22, pp.35-31, 2005
  110. "ذوب احیایی کنسانتره ایلمنیت معدن کنوج در بوته منیزیتی با استفاده از فرآیند ESCM"
    مهدی پورعبدلی , Shahram Raygan, Hossein Abdizadeh, کاظم حنایی
    Journal of Financial and Management Engineering Exchange, Vol. -, No 21, pp.31-26, 2005

Conference Paper

  1. "The effect of temperature and urea concentration on morphology and phase composition of cobalt-based electrocatalysts supported on carbon cloth"
    Aref Besharat, Shahram Raygan
    The 13th international conference on Materials Engineering and metallurgy IMAT2023, 2024
  2. "Microstructure and tensile properties of Cu-Al-Ni-Ti-Nb shape memory alloy"
    Arya Mohammadzadeh, Shahram Raygan
    The 12th international conference on Materials and metallurgical engineering IMAT2023, 2023
  3. "Study of Pull-Out and Load Transfer Mechanisms in Aluminum Matrix Nanocomposite by Molecular Dynamics Simulations"
    Saeid Bahramzadeh, razieh adelfar, Shahram Raygan
    The 12th international conference on Materials and metallurgical engineering IMAT2023, 2023
  4. "Transformation temperatures and tensile properties of Cu-Al-Ni-Ti-Nb-B shape memory alloy"
    Arya Mohammadzadeh, Mojtaba Rajabzadeh, Shahram Raygan
    The 12th international conference on Materials and metallurgical engineering IMAT2023, 2023
  5. "Investigating Shear Behavior of Al-CNT Nanocomposites: The Influence of Loading Direction through Molecular Dynamics Simulations"
    Saeid Bahramzadeh, Shahram Raygan
    9th International Biennial Conference on Ultrafine Grained and Nanostructured Materials (UFGNSM 2023), 2023
  6. "Experimental study on selective separation of yttrium from europium with D2EHPA solvent"
    Mohamadreza Arefzadeh, Shahram Raygan
    9th international conference on materials engineering and metallurgy, 2020
  7. "Optimization of Yttrium oxide leaching from red phosphor waste fluorescent lamps by D-optimal design"
    Mohamadreza Arefzadeh, Shahram Raygan
    7th international conference on materials engineering and metallurgy, 2018
  8. "6th international conference on materials engineering and metallurgy"
    Mohammad Sefidmooy Azar, Shahram Raygan, Saeed Sheibani
    effect of heat treatment time and temperature on the microstructural characteristics of Mechanothermal synthesized zinc ferrite, 2017
  9. "Leaching of NdFeB scrap permanent magnet in Nitric Acid"
    Mohammad Hamedi, Iman Ramezi, Shahram Raygan
    6th international conference on materials engineering and metallurgy, 2017
  10. "Synthesis and characterization of nickel zinc spinel ferrite synthesized by inverse co-precipitation method"
    Amin Ahangari Asl, Shahram Raygan, Abolghasem Ataei
    6th international conference on materials engineering and metallurgy, 2017
  11. "Optimization of Dysprosium leaching from used permanent magnets in sulfuric acid using response surface methodology design"
    Shayeste Vakilinoor, Shahram Raygan, Fereshteh Rashchi
    6th international conference on materials engineering and metallurgy, 2017
  12. "Evolution of Isothermal Pearlitic Transformation in Micro-alloyed Steel by Rare Earth Addition"
    Hadi Torkamani, Fatemeh Jelokhani, Shahram Raygan, Jafar Rasi Zadeh Ghani, Yahya Palizdar, M. M. Aranda, David San Martin, Coze Garcia Mateo
    5th international conference on materials engineering and metallurgy, 2016
  13. "Leaching of NdFeB scrap permanent magnet in sulfuric acid"
    Iman Ramezi, Shahram Raygan
    5th international conference on materials engineering and metallurgy, 2016
  14. "Investigation on the Reduction of Low Grade Hematite Ore to Magnetite by Non-Coking Coal"
    Mohammad Hosein Monzavi, Shahram Raygan
    5th international conference on materials engineering and metallurgy, 2016
  15. "Ferrotungsten production by alumenothermic process"
    Ahmad Rezaei, Shahram Raygan, Ali Jafari
    4th international conference & 9th congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen’s Society, 2015
  16. "Investigation on the Simultanous effect of Addinf Mischmetal and ball milling on Hydrogen Desorption Properties of Magnesium Hydride"
    Mohammad Amin Rahmani Nasab, Shahram Raygan, Hossein Abdizadeh
    4th international conference & 9th congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen’s Society, 2015
  17. "Nickel leaching from a hazardous waste by sulfuric acid"
    Seyed Abolfazl Hosseini, Shahram Raygan, Ahmad Rezaei, Ali Gafari
    4th international conference & 9th congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen’s Society, 2015
  18. "Investigating Hudrogen desorption properties of MgH2+TiO2 and MgH2 + NiO nanocomposites"
    Farshad Rajabpour, Shahram Raygan, Hossein Abdizadeh
    4th international conference & 9th congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen’s Society, 2015
  19. "leaching study of a secondry cobalt source by sulfiric acid"
    Ahmad Rezaei, Shahram Raygan, Seyed Abolfazl Hosseini, Ali Jafari
    4th international conference & 9th congress Iranian Metallurgical & Materials Engineering Society & Iranian Foundrymen’s Society, 2015
  20. "The Effect of Mechanical- Chemical Activated Red Mud on the Removal of Cr(VI) from Aqueous Solution"
    Atefe Hashemi, Shahram Raygan
    8th congress & 3rd international engineering materials and metallurgy conference, 2014
  21. "Failure analysis of size 32 constructional steel bars produced by Iran national industrial steel group"
    Parham Kabirifar, Shahram Raygan, Yahya Palizdar, Alireza Shalbafi, Hamidreza Amiri, Fereydon Ghorbani, Solat Birganinia
    3rd international engineering materials and metallurgy conference, 2014
  22. "Synthesis and structural characterization of nanostructured Mg2Ni9Y catalyst by mechanical milling and subsequent heat treatment"
    Faranak Hosseini Gorajobi, Shahram Raygan
    The 8th joint congress of Iranian Metallurgical society and Iranian founry men's society and 3rd international engineering materials and metallurgy conference, 2014
  23. "Application of Red Mud Adsorbent to Remove Contaminants from Aqueous Environments"
    Hamidreza Gharibi, Abolghasem Alighardashi, Shahram Raygan, Abbas Akbarzadeh, مجتبی فاضلی, Abdolreza Khaksar
    5th national conference on water resources management, 2014
  24. "charachteristic improvement of red mud adsorbent by mechanochemical activation"
    Hamidreza Gharibi, Abolghasem Alighardashi, Shahram Raygan, Abbas Akbarzadeh, Mojtaba Fazeli
    chemtech 13, 2013
  25. "use of alumina producing waste (red mud) as an absorbent to remove nitrate from water"
    Hamid Reza Gharibi, Abolghasem Alighardashi, Shahram Raygan, Abbas Akbarzadeh
    The first international conference on Minning, Mineral processing, Metallurgical and Enviromental Engineering, 2013
  26. "Hydrogen Desorption Characteristics of Nano-structured MgH2-10 wt. Mg2Ni9Y Prepared by Ball Milling"
    مهدی پورعبدلی, Shahram Raygan, Hossein Abdizadeh, Y.U. Jeong, D. Uner
    the 29th International Korea-Japan Seminar on Ceramics, 2012
  27. "kinetic studies for gold leaching of a refractory sulfide concentrate by chloride-hypochlorite solution"
    Mehdi Ghobeiti Hasab, Fereshteh Rashchi, Shahram Raygan
    The First International The Sixth Joint Conference of Iranian Metallurgical Engineering society and Iranian Foundrymens Society, 2012
  28. "comparing graphite and petrocoke on the production of Fe-TiC nanocomposite from oxides via mechanical milling and heat treatment"
    سمانه نیک سیرت, Shahram Raygan, سارا مرادی غیاث ابادی
    Internationl congress on nanoscience and nanotechnology (ICNN 2012, 2012
  29. "Application of Mechanical Milling and Heat Treatment on the Fe2O3/TiO2/Petrocoke Powder Mixture to Produce Fe-TiCNanocomposite"
    Shahram Raygan, سمانه نیک سیرت
    19th international symposium on metastable amorphous and nanostructured materials ISMANAM 2012, 2012
  30. "The Catalytic Effect of Nanostructure MgNi4Y on Hydrogen Desorption"
    لیلا چیت ساز خویی, Shahram Raygan
    19th international symposium om metastable amorphous and nanostructured materials ISMANAM 2012, 2012
  31. "Effects of Immersion Time in Bright Hardening on the Microstructure and Mechanical Properties of AISI D2 Steel"
    Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani, لیلا چیت ساز خویی
    International Conference on Materials Heat Treatment (ICMH 2012, 2012
  32. "Synthesizing of nano-structure MgNi4Y alloy by mechanical milling and heat treatment"
    Leila Chitsazkhoyi, Shahram Raygan
    New and Advanced Materials International Congress, 2012
  33. "Process Development for the Removal of Cr(VI from Effluents Using Red Mud an Aluminium Industry waste: Batch Studies"
    محمود احتشامی, Shahram Raygan, Hossein Abdizadeh
    of Iran International Aluminum Conference (IIAC2012, 2012
  34. "REMOVAL OF LEAD IONS FROM AQUEOUS SOLUTION BY NANOCRYSTALLINE MAGNETITE SYNTHESIZED VIA MECHANIAL MILLING"
    Mohsen Hosseinzadeh, Seyed Ali Seyed Ebrahimi, Shahram Raygan
    3rd International Conference on Ultrafine Grained and Nanostructured Materials, 2011
  35. "ON THE KINETICS OF REACTIONS TAKE PLACE DURING MECHANOCHEMICAL SYNTHESIS OF W-Cu AND Mo-Cu NANOCOMPOSITES FROM THE OXIDE COMPOUNDS"
    Ata Dolatmoradi, abazar rahmani, Shahram Raygan, Hossein Abdizadeh
    Thirteenth Annual Conference YUCOMAT 2011, 2011
  36. "SYNTHESIS OF fine Ni75Mg16.66Y8.34 (at POWDER FOR USING AS A CATALYST BY SOLID REACTION AND MECHANICAL MILLING"
    Shahram Raygan, Mahdi Pourabdoli, Hossein Abdizadeh, Mamoun Medraj
    VII International Conference on Mechanochemistry and Mechanical Alloying INCOME 2011, 2011
  37. "effects of bright hardening on the retained austenite, refinement of carbide precipitates and mechanical properties of AISI D2 steel"
    Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani
    2nd international conference on materials heat treatment ICMH2011, 2011
  38. "Formation of Nanocrystalline and Ultrafine-grained Structures in Disk-shaped Samples of Fe-0.15C and Interstitial-free (IF Steels Produced by Ball Milling"
    Ata Dolatmoradi, Mojtaba Asadirad , Shahram Raygan, Kamran Dehghani , jalil vahdati khaki
    COM2010-49th Annual Conference of Metallurgist in conjunction with Lead-Zinc 2010, 2010
  39. "Different Parameters of Solution Affecting on the Adsorption of Cr(VI) Ions with Nanomagnetite"
    nazanin javadi, Shahram Raygan, Seyed Ali Seyed Ebrahimi, khorasani pour reza
    International Conference on Nanotechnology: Fundamentals and Applications, 2010
  40. "Heat Treatment of Mechano-Chemically Produced BaFe12O19/Fe3O4 magnetic nano-composites"
    Seyyed Mohammad Molayi, Abolghasem Ataei, Shahram Raygan
    Trends in spintronic and Nanomagnetism, 2010
  41. "The Effect of High Energy Milling on The Sr-Hexaferrite Nanocrystalline Powder Synthesized By a Sol-Gel Autocombustion Method"
    Somaye Sadeghi, Seyed Ali Seyed Ebrahimi, Shahram Raygan
    2nd International Conference on Ultrafine Grained and Nanostructured Materials, 2009
  42. "Production of Nanocrystalline Magnetite for Adsorption of CrVIIons"
    nazanin javadi, Shahram Raygan, Seyed Ali Seyed Ebrahimi
    2nd International Conference on Ultrafine Grained and Nanostructured Materials, 2009
  43. "Synthesis of Barium Hexaferrite/Iron Oxides Magnetic nano-composites via high energy ball milling and subsequent heat treatment"
    Seyyed Mohammad Molayi, Abolghasem Ataei, Shahram Raygan
    UFGNSM09, 2009
  44. "synthesis of barium hexaferrite/iron oxides magnetic nano-composites via high energy ball milling and subsequent heat treatment"
    Seyyed Mohammad Molayi, Abolghasem Ataei, Shahram Raygan
    2nd international conference on ultrafine grained and nanostructured materials, 2009
  45. "Synthesis of magnetic nano-composite by partial reduction of barium hexaferrite via high energy ball milling"
    Seyyed Mohammad Molayi, Abolghasem Ataei, Shahram Raygan
    The sixth China International Conference on High Performance Ceramics, 2009
  46. "Effect of Mechanical Activation on the In-situ Production of Fe-TiC Composite"
    Sara Moradi Ghaissabadi, Shahram Raygan
    Income 2008, 2008
  47. "Investigating the effect of washing the magnetic concentrate on the ions associated with the filter cake and Properties of concentrate particles"
    Elahe Dehshirizadeh, Saeed Sheibani, Shahram Raygan, حسین زیدآبادی, رضا عابدی, محمدباقر بارزبان
    The 13th international conference on Materials Engineering and metallurgy IMAT2024, 2024
  48. "Investigating the effect of Tempering on transformations and hardness of Dual-phased NiCrMoV steel by intermediate quenching method"
    Mohammad ali Aghamorshedi, Shahram Raygan, Jafar Rasi Zadeh Ghani
    The 13th international conference on Materials Engineering and metallurgy IMAT2024, 2024
  49. "Synthesis method of Ni2P electrocatalyst precipitated on carbon cloth using vacuum tube furnace"
    Bagherieh mohammad hossein, Shahram Raygan
    The 13th international conference on Materials Engineering and metallurgy IMAT2024, 2024
  50. "Chalenges and solutions to obtain fluffy slag in electric arc furnace steelmaking"
    Saeed Sheibani, Shahram Raygan
    3rd International conference on Steelmaking & Continuous Casting, 2024
  51. "Synthesis of ferrotitanium alloy through aluminothermic reduction of titanium oxide-enriched slag and its characterization"
    Mahdi peyravi, Shahram Raygan
    The 12th international conference on Materials and metallurgical engineering IMAT2023, 2023
  52. "Chemical characterization of filter cake moisture of magnetic concentrate from Golgohar-Sirjan"
    Elaheh Dehshiri, Saeed Sheibani, Shahram Raygan, Hossein Zeydabadi, Reza Abedi, Mohammad Bagher Barezban
    The 12th international conference on materials science & metallurgical engineering, 2023
  53. "Investigating the effect of heat treatment method on the hardness of two-phase NiCrMoV steel"
    Mohammad ali Aghamorshedi, Shahram Raygan, Jafar Rasi Zadeh Ghani
    The 12th international conference on Materials and metallurgical engineering IMAT2023, 2023
  54. "Performance evaluation of 3Ni-4Al-1Zn and 4Ni-3Al-1Zn coating on nickel foam To produce hydrogen from an aqueous solution"
    Mahdi Abolghasemi, Shahram Raygan, Ghasem Barati darband
    The 11th international conference on Materials and metallurgical engineering IMAT2022, 2022
  55. "Comparison of the effect of grinding of Gol-Gohar-Sirjan magnetite concentrate by ball milling and high pressure grinding roll on pellet properties in induration process"
    Hosain Elahi doost, Leila Hosseini, علی دهقانی احمد ابادی , Saeed Sheibani, Shahram Raygan
    Steel symposium 401, 2022
  56. "Effect of the milling method of magnetic concentrate on the properties of raw pellets"
    Hosain Elahi doost, Saeed Sheibani, Shahram Raygan, Leila Hosseini, علی دهقانی احمد ابادی
    Steel symposium 1400, 2021
  57. "Properties and quality of pellets prepared from ball milled magnetic concentrate in different parts of the thermal profile of induration process"
    Hosain Elahi doost, Leila Hosseini, Saeed Sheibani, Shahram Raygan, Nader Esmaeili
    10th International Conference on Materials Science & Metallurgical Engineering (iMat2021), 2021
  58. "Study of using mechanically activated red mud adsorbent for decreasing the nitrate Ions from waste water"
    Abolghasem Alighardashi, Samaneh Havaseliashtiani, Shahram Raygan
    The 8th National conference and Exhibition on Environmental Engineering, 2016
  59. "Effect if MO on the microstructure and mechanical properties of low carbon cast microalloy steel"
    Hooman Rashvand, Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani, Yahya Palizdar
    steel symposium 94, 2016
  60. "Effect of Tempering Temperature on the mechanical properties of low carbon cast microalloy steel"
    Hooman Rashvand, Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani, Yahya Palizdar
    steel symposium, 2016
  61. "Investigating on the effect of Mo and B as alloying elements on the mechanical properties and hardenability of quenched and tempered cast microalooy steel"
    Hooman Rashvand, Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani, Yahya Palizdar
    steel symposium 94, 2016
  62. "Investigation on removal of Cr+6 and Zn heavy ions by chemi-mechanical activated red moude"
    Noras Ghanbarpour, Shahram Raygan, Hossein Abdizadeh
    7th National Conference & Exhibition on Environmental Engineering, 2014
  63. "microstructure and physical properties of Cu-Al-Ni-Mn shape memory alloy produced by hot pressing and sintering"
    Elnaz Yousefzadeh, Abbas Hanabakhsh, Shahram Raygan
    The second international and the seventh joint conference of iranian metallurgical engineering and iranian foundrymen scientific societies, 2013
  64. "barsy"
    امید گنجی, Shahram Raygan, جلیل وحدتی خاکی
    hamayesh..., 2012
  65. "Nano"
    Ata Dolatmoradi, Shahram Raygan, Hossein Abdizadeh
    hamayesh..., 2012
  66. "taser"
    لیلا چیت ساز خوئی, Shahram Raygan
    hamayesh..., 2012
  67. "nano"
    Hossein Molavi, Abolghasem Ataei, Shahram Raygan
    hamayesh..., 2012
  68. "In-situ synthesis of Fe-TiC nanocomposite by ball milling and subsequent heat treatment of Fe2O3/TiO2/Petroleum coke mixture"
    Samaneh Niksirat, Shahram Raygan
    first national conference of nanomaterials and nanotechnology, 2012
  69. "اثر ترکیب شیمیایی روکش الکترود بر ریز ساختار و مقاومت به ضربه جوش های تولیدی به روش SMAW"
    فهیمه سادات تیموری, Shahram Raygan, Ayyub Halvaee, سیدرضا امیرآبادی زاده
    سومین کنفرانس بین المللی مهندسی ساخت وتولید, 2011
  70. "بررسی اثر تغییرات در ترکیب شیمیایی روکش الکترود E310 بر میزان بازیابی و تلفات عناصر آلیاژی در منطقه جوش"
    Ayyub Halvaee, فهیمه سادات تیموری, سیدرضا امیرآبادی زاده, Shahram Raygan
    دوازدهمین کنفرانس ملی جوش و بازرسی, 2011
  71. "Removal of Cd from aqueous solution by using nanocrystalline synthesized through machanochemical reduction magnetite"
    Mohsen Hosseinzadeh, Seyed Ali Seyed Ebrahimi, Shahram Raygan
    5th national conference and exhibition on environmental engineering, 2011
  72. "Effect of Composition and Basicity of Electrode E310 Coating on the Recovery and Loss of Alloying Elements in the Welding Zone"
    Ayyub Halvaee, فهیمه سادات تیموری, Shahram Raygan, سیدرضا امیر آبادی زاده
    5th joint conference of metallurgical engineering society and casting scientific society, 2011
  73. "effect of heat treatment and grain size on the mechanical properties of TiC coating on AISI D2 steel produced by mechanical milling"
    Farhad Saba, Shahram Raygan, Hossein Abdizadeh
    steel symposium 89, 2011
  74. "Role of volatile materials of non-coking coal on the reduction of iron oxide"
    امید گنجی, جلیل وحدتی خاکی, Shahram Raygan, محمد حسین همتی
    steel symposium 89, 2011
  75. "producttion of ferroboron by aluminothermic process in electroslag remelting furnace"
    amir hanaei, Hossein Abdizadeh, Shahram Raygan
    steel symposium 89, 2011
  76. "production of TiC coating on D2 steel via mechanical milling"
    Farhad Saba, Shahram Raygan, Hossein Abdizadeh
    4th joint conference of metallurgical engineering society and casting scientific society, 2010
  77. "adsorption of Cr+6 from aqueous solution using red mud activated by nitric acid"
    mahmood ehteshami, Shahram Raygan, Hossein Abdizadeh
    4th joint conference of metallurgical engineering society and casting scientific society, 2010
  78. "Comparison Mechanical Properties and Microstructure of AISI D2 Steel due to Bright Hardening Process and quenching in Oil"
    Hadi Torkamani, Shahram Raygan, Jafar Rasi Zadeh Ghani
    4th joint conference of metallurgical engineering society and casting scientific society, 2010
  79. "investigating the transformation behavior of aged NiTi orthodontic wire"
    seyyed mohammad Seyyed Aghamir, Mahmoud Nili Ahmadabadi, Shahram Raygan
    3th joint conference of metallurgical engineering society and casting scientific society, 2009
  80. "Investigation on the effect of hot rolling on the electrical resistivity and high temperature oxidation resistance of Fe-21%Cr-5.3%Al alloy"
    بهزاد امین فرقانی, Shahram Raygan, فرزانه کاسب احدی
    3th joint conference of metallurgical engineering society and casting scientific society, 2009
  81. "Remove of Chromium from Waste Waters by Magnetite Nanoparticles"
    nazanin javadi, Shahram Raygan, Seyed Ali Seyed Ebrahimi
    The 3rd Conference on Environmental Engineering Tehran, 2009
  82. "production of nanocrystalline magnetite from Hematite/graphite powder mixture through mechanical activation and heat treatment"
    nazanin javadi, Shahram Raygan, Seyed Ali Seyed Ebrahimi
    7th Iranian ceramic congress, 2009
  83. "investigating the effect of high energy ball milling on the nanocrystalline strontium hexaferrite powder"
    Somaye Sadeghi, Seyed Ali Seyed Ebrahimi, Shahram Raygan
    7th Iranian ceramic congress, 2009
  84. "investigating the effect of high energy ball milling on the nanocrystalline barium hexaferrite produceded by self combustion sol-gel synthesis and subsequent calcination method"
    Somaye Sadeghi, Seyed Ali Seyed Ebrahimi, Shahram Raygan
    7th Iranian ceramic congress, 2009
  85. "Metallic chromium production from ferrochromium by hydrometallurgical process"
    امیرحسین یقطین, Shahram Raygan, رامز وقار, مریم یقطین
    2nd joint conference of metallurgical engineering society and casting scientific society, 2008
  86. "effect of primary sol pH on morphology and grain size of silicon carbide (SiC) nanopowder synthesized by sol-gel method"
    احسان اولیایی, Hossein Abdizadeh, Shahram Raygan, حمیدرضا بهاروندی, ناصر احسانی
    2nd joint conference of metallurgical engineering society and casting scientific society, 2008