مقالات علمی چاپ شده در مجلات

1. "In silico actuation performance investigation of dielectric elastomers with TPMS geometries"
   Mohammad Ali Safaei, Mostafa Baghani, Majid Baniassadi, Mahdi Bodaghi
   EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 111, 2025
2. "4D Printing of Polyethylene Glycol‐Grafted Carbon Nanotube‐Reinforced Polyvinyl Chloride–Polycaprolactone Composites for Enhanced Shape Recovery and Thermomechanical Performance"
   Davood Rahmatabadi, Mohammad Amin Yousefi, Shahrouz Shamsolhodaei, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
   Advanced Intelligent Systems, Vol. -, 2025
3. "Simultaneous 4D printing and In-Situ foaming for tailoring shape memory behaviors in polylactic acid foams"
   Pedram Honari, Davood Rahmatabadi, Abbas Bayati, Erfan Rassi, Ismaeil Ghasemi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   Manufacturing Letters, Vol. 43, pp.33-36, 2025
4. "Fracture behavior of W-20Cu composite processed via copper melt infiltration into tungsten wire skeleton"
   Homayoun Safahi, Mohammad Reza Sabour, Majid Baniassadi, Ghader Faraji
   ENGINEERING FAILURE ANALYSIS, Vol. 172, 2025
5. "Developing a multi-scale model for the simulation of adsorption phenomena based on MD and CA: a Li-ion battery case study"
   Omid Ziaee, Naeem Zolfaghari, Mostafa Baghani, Mahdi Bodaghi, Majid Baniassadi
   Computational Particle Mechanics, Vol. -, 2025
6. "Unveiling novel structural complexity of spiral carbon nanomaterials: Review on mechanical, thermal, and interfacial behaviors via molecular dynamics"
   Ali Sharifian, Parmida Fareghi, Mostafa Baghani, Gregory M. Odegard, Adri C.T. van Duin, Ali Rajabpour, Jianyang Wu., Majid Baniassadi
   JOURNAL OF MOLECULAR STRUCTURE, Vol. 1321, 2025
7. "3D printed elastomers with superior stretchability and mechanical integrity by parametric optimization of extrusion process using Taguchi Method"
   Abbas Bayati, Mina Ahmadi, Davood Rahmatabadi, Mohammad Khodaei, Hao Xiang, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi, Mostafa Baghani
   Materials Research Express, Vol. 12, No 1, 2025
8. "Transfer learning-based techniques for efficient 3D-reconstruction of functionally graded materials"
   Seyed Pouria Hamidpour, Alireza Araee, Majid Baniassadi
   MATERIALS & DESIGN, Vol. 248, 2024
9. "4D printing and optimization of biocompatible poly lactic acid/poly methyl methacrylate blends for enhanced shape memory and mechanical properties"
   Hossein Doostmohammadi, Kamyab Kashmarizad, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
   Journal of the Mechanical Behavior of Biomedical Materials, Vol. 160, 2024
10. "Numerical and experimental investigation of 3D printed tunable stiffness metamaterial with real-time response using digital light processing technology"
    Mahdi Khajepour, Abbas Bayati, Behrad Rezaee, Alireza Khatami, Mohmmad Amin Soltani, Ghader Faraji, Karen Abrinia, Mostafa Baghani, Majid Baniassadi
    Journal of Materials Research and Technology-JMR&T, Vol. 33, pp.480-490, 2024
11. "Development and 4D printing of magneto-responsive PMMA/TPU/Fe3O4 nanocomposites with superior shape memory and toughness properties"
    Afshin Ahangari, Hossein Doostmohammadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    EUROPEAN POLYMER JOURNAL, Vol. 220, 2024
12. "4D Printing of Multifunctional and Biodegradable PLA-PBAT-Fe3O4 Nanocomposites with Supreme Mechanical and Shape Memory Properties"
    Mohammad Amin Yousefi, Davood Rahmatabadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR RAPID COMMUNICATIONS, Vol. -, pp.1-18, 2024
13. "Poly(ethylene terephthalate) glycol/carbon black composites for 4D printing"
    Davood Rahmatabadi, Abbas Bayati, Mahdi Khajepour, Kiandokht Mirasadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MATERIALS CHEMISTRY AND PHYSICS, Vol. 325, 2024
14. "4D printing thermo-magneto-responsive PETG-Fe3O4 nanocomposites with enhanced shape memory effects"
    Davood Rahmatabadi, Kiandokht Mirasadi, Abbas Bayati, Mahdi Khajepour, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    Applied Materials Today, Vol. 40, 2024
15. "Multiscale investigation of debonding behavior in anisotropic graphene–polyethylene metamaterial nanocomposites"
    Mohammad Safaei, M. R. Karimi, Daniyal Pourbandari, Mostafa Baghani, Danyel George, Majid Baniassadi
    CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 36, No 6, pp.1767-1785, 2024
16. "Microencapsulation of natural products using spray drying; an overview"
    Mahshid Mardani, Saeed Siahtiri, Masoud Besati, Mostafa Baghani, Majid Baniassadi, Alireza Mahdavi Nejad
    JOURNAL OF MICROENCAPSULATION, Vol. 41, No 7, pp.649-678, 2024
17. "Processing of fully dense and high conductivity W-20Cu composite via copper melt infiltration into a pressed tungsten wire skeleton"
    Homayoun Safahi, Majid Baniassadi, Ghader Faraji
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, Vol. 124, 2024
18. "Advancing sustainable shape memory polymers through 4D printing of polylactic acid-polybutylene adipate terephthalate blends"
    Davood Rahmatabadi, Mahdi Khajepour, Abbas Bayati, Kiandokht Mirasadi, Mohammad Amin Yousefi, Atefeh Shegeft, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    EUROPEAN POLYMER JOURNAL, Vol. 216, 2024
19. "Fractal Circuit Architectures for Spatially Controlled Heating and Multi-Modal Shape Programming of Electro-Active Shape Memory Polymers"
    Alireza Enferadi, Majid Baniassadi, Mostafa Baghani
    International Journal of Applied Mechanics, Vol. 16, No 6, 2024
20. "Multiphase Reconstruction of Heterogenous Materials Using Machine Learning and Quality of Connection Function"
    Pouria Hamidpour, Alireza Araee, Majid Baniassadi, Hamid Garmestani
    MATERIALS, Vol. 17, No 13, 2024
21. "4D Printing of Magneto-Thermo-Responsive PLA/PMMA/Fe3O4 Nanocomposites with Superior Shape Memory and Remote Actuation"
    Hossein Doostmohammadi, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 309, No 9, 2024
22. "Influence of Programming and Recovery Parameters on Compressive Behaviors of 4D‐Printed Biocompatible Polyvinyl Chloride or Vinyl–Poly(ε‐Caprolactone) Blends"
    Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    ADVANCED ENGINEERING MATERIALS, Vol. 26, No 12, 2024
23. "Multiscale modeling of unfolding and bond dissociation of rubredoxin metalloprotein"
    Aliakbar Sheikhzadeh, Mohammad Safaei, Vahid Fadaei Naeini, Mostafa Baghani, Masumeh Foroutan, Majid Baniassadi
    JOURNAL OF MOLECULAR GRAPHICS & MODELLING, Vol. 129, No 108749, 2024
24. "Design, processing, 3D/4D printing, and characterization of the novel PETG–PBAT blends"
    Saeed J. A. Ali, Davood Rahmatabadi, Mostafa Baghani, Majid Baniassadi
    JOURNAL OF MATERIALS SCIENCE, Vol. 59, pp.9150-9164, 2024
25. "3D and 4D Printing of PETG–ABS–Fe3O4 Nanocomposites with Supreme Remotely Driven Magneto-Thermal Shape-Memory Performance"
    Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mahdi Bodaghi, Mostafa Baghani
    Polymers, Vol. 16, No 10, 2024
26. "Experimental Evaluation of Mechanical Properties, Thermal Analysis, Morphology, Printability, and Shape Memory Performance of the Novel 3D Printed PETG‐EVA Blends"
    Saeed J. A. Al, D.. Rahmat Abadi, Mostafa Baghani, Majid Baniassadi
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2024
27. "3D-Printed Polycaprolactone-Based Containing Calcium Zirconium Silicate: Bioactive Scaffold for Accelerating Bone Regeneration"
    Hosein Emadi, Mostafa Baghani, Maryam Masoudi Rad, Bahareh Hoomehr, Majid Baniassadi, Saeid Lotfian
    Polymers, Vol. 16, No 10, 2024
28. "Insight into single-helix intelligent shape memory polymer cables: modeling and optimization under finite sliding contact"
    Alireza Enferadi, Alireza Ostadrahimi, Guoqiang Lii, Majid Baniassadi, Mostafa Baghani
    Smart Materials and Structures, Vol. 33, No 5, 2024
29. "4D printing and annealing of PETG composites reinforced with short carbon fibers"
    Davood Rahmatabadi, Elias Soleiman, Mahshid Fallah MinBashi, Mohammad Aberoumand, kianoush Soltanmohammadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    PHYSICA SCRIPTA, Vol. 99, 2024
30. "3D printing super stretchable propylene-based elastomer"
    Abbas Bayati, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    MATERIALS LETTERS, Vol. 361, 2024
31. "Investigating the Effect of ABS on the Mechanical Properties, Morphology, Printability, and 4D Printing of PETG‐ABS Blends"
    Kiandokht Mirasadi, Davood Rahmatabadi, Ismaeil Ghasemi, Mohammad Khodaei, Majid Baniassadi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. 309, No 6, 2024
32. "Cold programming of ordered porous PETG 4D printed by material extrusion"
    Elyas Soleyman, Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, I.. Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, Vol. 24, 2024
33. "In silico optimization of aligned fiber electrodes for dielectric elastomer actuators"
    Mohammad Reza FIroozan, Majid Baniassadi, Mostafa Baghani, Alex Chortos
    Scientific Reports, Vol. 14, No 1, 2024
34. "Effects of TPU on the mechanical properties, fracture toughness, morphology, and thermal analysis of 3D-printed ABS-TPU blends by FDM"
    kianoush Soltanmohammadi, Davood Rahmatabadi, Mohammad Aberoumand, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, Vol. -, 2024
35. "Enhancing the Thermal Performance of Shape Memory Polymers: Designing a Minichannel Structure"
    Saed Beshkoofe, Majid Baniassadi, Alireza Mahdavinejad, Azadeh Sheidaei, Mostafa Baghani
    Polymers, Vol. 16, No 4, 2024
36. "Development of 3D-Printed PCL/ Baghdadite Nanocomposite Scaffolds for Bone Tissue Engineering Applications"
    Hosein Emadi, Mostafa Baghani, Mohammad Khodaei, Majid Baniassadi, Fariborz Tavangarian
    JOURNAL OF POLYMERS AND THE ENVIRONMENT, Vol. -, 2024
37. "Developing a multiscale approach for damage analysis of functionalized-GNP/PET nanocomposite"
    Mohammad Safaei, Daniel Pourbandari, Mohammadreza Karimi, Mostafa Baghani, Karen Abrinia, Kui Wang, Majid Baniassadi
    JOURNAL OF MATERIALS SCIENCE, Vol. 59, No 7, pp.2907-2923, 2024
38. "4D printing of porous PLA-TPU structures: effect of applied deformation, loading mode and infill pattern on the shape memory performance"
    Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    PHYSICA SCRIPTA, Vol. 99, No 2, 2024
39. "An investigation on an SMA valve in micro-channel through FSI approach"
    Saed Beshkoofe, Mostafa Baghani, Majid Baniassadi, Hamid Shahsavari
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. 2450028, 2024
40. "Innovative multiphysics approach for designing high-performance thermo-responsive shape memory polymer microvalve"
    Alireza Enferadi, Majid Baniassadi, Mostafa Baghani
    EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, Vol. 103, 2024
41. "Application of the Quality by Design Concept (QbD) in the Development of Hydrogel-Based Drug Delivery Systems"
    Seyed-Farid Mohseni-Motlagh, Roshanak Dolatabadi, Majid Baniassadi, Mostafa Baghani
    Polymers, Vol. 15, No 22, 2023
42. "Stress recovery and stress relaxation behaviors of PVC 4D printed by FDM technology for high-performance actuation applications"
    Mohammad Aberoumand, Davood Rahmatabadi, kianoush Soltanmohammadi, Elyas Soleyman, اسماعیل قاسمی, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    SENSORS AND ACTUATORS A-PHYSICAL, Vol. 361, 2023
43. "Novel modified triply periodic minimal surfaces (MTPMS) developed using genetic algorithm"
    Saeed Khaleghi, Mostafa Baghani, Morad Karimpour, Masoud Shariat Panahi, Kui Wang, Majid Baniassadi
    Journal of Materials Research and Technology-JMR&T, Vol. 26, No 1, pp.2881-2906, 2023
44. "Developing Multi-Scale Model for Graphene Cement Nanocomposite Study of Damage Initiation"
    Hamic Haghverdian, Danial Pourbandari, Abolfazl Alizadeh Sahraei, Hamidreza Nasersaeed, Majid Baniassadi, Mostafa Baghani
    JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME, Vol. -, 2023
45. "Tablet Geometry Effect on the Drug Release Profile from a Hydrogel-Based Drug Delivery System"
    Seyed-Farid Mohseni-Motlagh, Roshanak Dolatabadi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
    Pharmaceutics, Vol. 15, No 7, 2023
46. "Numerical simulation of the effect of geometric parameters on silicone airway stent migration"
    Maryam Mazraehei Farahani, Arman Bakhtiyari, Saed Beshkoofe, Abdolmohammad Kajbafzadeh, Arda Kiani, Amir Hossein Eskandari, Majid Baniassadi, Mostafa Baghani
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 9, 2023
47. "Design and fabrication of silicone-silica nanocomposites airway stent"
    Zahra Mora Haseli, Maryam Mazraehei Farahani, Majid Baniassadi, Seyed Farshid Chini, Abdol-Mohammad Kajbafzadeh, Arda Kiani, Mostafa Baghani
    Frontiers in Materials, Vol. 10, 2023
48. "Shape memory performance assessment of FDM 3D printed PLA-TPU composites by Box-Behnken response surface methodology"
    D.. Rahmat Abadi, kianoush Soltanmohammadi, Mostafa Pahlavani, Mohammad Aberoumand, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, Vol. 127, pp.935-950, 2023
49. "Toughening PVC with Biocompatible PCL Softeners for Supreme Mechanical Properties, Morphology, Shape Memory Effects, and FFF Printability"
    D.. Rahmat Abadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, No 2300114, pp.1-13, 2023
50. "Influence of Curing Agents Molecular Structures on Interfacial Characteristics of Graphene/Epoxy Nanocomposites: A Molecular Dynamics Framework"
    Saeed Siahtiry, Abolfazl Alizadeh Sahraei, Abdol Hadi Mokarizadeh, Mostafa Baghani, Mahdi Bodaghi, Majid Baniassadi
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, No 2300030, 2023
51. "4D printing of PLA-TPU blends: effect of PLA concentration, loading mode, and programming temperature on the shape memory effect"
    Davood Rahmatabadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    JOURNAL OF MATERIALS SCIENCE, Vol. 58, No 16, pp.7227-7243, 2023
52. "4D Printing of Polyvinyl Chloride (PVC): A Detailed Analysis of Microstructure, Programming, and Shape Memory Performance"
    Mohammad Aberoumand, kianoush Soltanmohammadi, Davood Rahmatabadi, Elias Soleiman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2023
53. "TPMS Metamaterial Structures Based on Shape Memory Polymers: Mechanical, Thermal and Thermomechanical Assessment"
    Fatemeh Sadeghi, Majid Baniassadi, Alireza Shahidi, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 23, pp.3726-3743, 2023
54. "Design of Refractory Alloys for Desired Thermal Conductivity via AI-Assisted In-Silico Microstructure Realization"
    Seyed Mohammad Ali Seyed Mahmoud, Ghader Faraji, Mostafa Baghani, Mohammad Saber Hashemi, Azadeh Sheidaei, Majid Baniassadi
    MATERIALS, Vol. 16, No 3, 2023
55. "Transient swelling-induced finite bending of hydrogel-based bilayers: analytical and FEM approaches"
    Arya Amiri, Majid Baniassadi, Mostafa Baghani
    APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION, Vol. 44, No 2, pp.273-288, 2023
56. "Unraveling the effect of hydrogenation on the mechanical properties of coiled carbon nanotubes: a molecular dynamics study"
    Mahdi Azhari Saray, Mostafa Baghani, Ali Rajabpour, Ali Sharifian, Majid Baniassadi
    PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 25, No 23, pp.15988-16000, 2023
57. "Four-dimensional printing of acrylonitrile butadiene styrene – thermoplastic polyurethane shape memory polymers with excellent material and interfacial adhesion performance"
    kianoush Soltanmohammadi, Mohammad Aberoumand, Davood Rahmatabadi, Elyas Soleyman, Sogol Ghasemi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    Express Polymer Letters, Vol. 17, No 11, pp.1082-1095, 2023
58. "A New Strategy for Achieving Shape Memory Effects in 4D Printed Two-Layer Composite Structures"
    Davood Rahmatabadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elyas Soleyman, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Ali Zolfagharian, Mahdi Bodaghi, Mostafa Baghani
    Polymers, Vol. 14, No 24, 2022
59. "Development of Pure Poly Vinyl Chloride (PVC) with Excellent 3D Printability and Macro‐ and Micro‐Structural Properties"
    Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Elias Soleiman, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    MACROMOLECULAR MATERIALS AND ENGINEERING, Vol. -, 2022
60. "4D Printing‐Encapsulated Polycaprolactone–Thermoplastic Polyurethane with High Shape Memory Performances"
    D.. Rahmat Abadi, Mohammad Aberoumand, kianoush Soltanmohammadi, Elyas Soleyman, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mahdi Bodaghi, Mostafa Baghani
    ADVANCED ENGINEERING MATERIALS, Vol. 2201309, 2022
61. "3D printing of PLA-TPU with different component ratios: Fracture toughness, mechanical properties, and morphology"
    Davood Rahmatabadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 21, No 1, pp.3970-3981, 2022
62. "An anisotropic constitutive model for fiber reinforced salt-sensitive hydrogels"
    Hamid Reza Safavi, Arya Amiri, Majid Baniassadi, Ali Zolfagharian, Mostafa Baghani
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, Vol. -, pp.1-14, 2022
63. "4D printing of PET-G via FDM including tailormade excess third shape"
    Elias Soleiman, Mohammad Aberoumand, kianoush Soltanmohammadi, Davood Rahmatabadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Manufacturing Letters, Vol. 33, pp.1-4, 2022
64. "Silk Fibroin Hydrogel Reinforced With Magnetic Nanoparticles as an Intelligent Drug Delivery System for Sustained Drug Release"
    Mahsa Haghighattalab, Abdolmohammad Kajbafzadeh, Mostafa Baghani, Ziba Gharehnazifam, Bahareh Mohammadi Jobani, Majid Baniassadi
    FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, Vol. 10, No 1, 2022
65. "Transient swelling of cylindrical hydrogels under coupled extension-torsion: Analytical and 3D FEM solutions"
    Arya Amiri, Majid Baniassadi, Mohammad Reza Bayat, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. -, 2022
66. "Shape memory performance of PETG 4D printed parts under compression in cold, warm, and hot programming"
    Elyas Soleyman, Davood Rahmatabadi, kianoush Soltanmohammadi, Mohammad Aberoumand, Esmaeil Ghasemi, Karen Abrinia, Majid Baniassadi, Kui Wang, Mostafa Baghani
    Smart Materials and Structures, Vol. 31, No 8, 2022
67. "Decisive structural elements in water and ion permeation through mechanosensitive channels of large conductance: insights from molecular dynamics simulation"
    Vahid Fadaei Naeini, Majid Baniassadi, Masumeh Foroutan, Yve Remond, Daniel George
    RSC Advances, Vol. 12, No 28, pp.17803-17816, 2022
68. "Multiphysics modeling and experiments on ultrasound-triggered drug delivery from silk fibroin hydrogel for Wilms tumor"
    Ziba Gharehnazifam, Roshanak Dolatabadi, Majid Baniassadi, Hamid Shahsavari, Abdol-Mohammad Kajbafzadeh, Karen Abrinia, Kimia Gharehnazifam, Mostafa Baghani
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, Vol. 621, 2022
69. "Application of machine learning methods on dynamic strength analysis for additive manufactured polypropylene-based composites"
    Ruijun Cai, Kui Wang, Wei Wen, Yong Pengab, Majid Baniassadi, Said Ahzi
    POLYMER TESTING, Vol. 110, No 1, 2022
70. "Statistical prediction of bone microstructure degradation to study patient dependency in osteoporosis"
    Seyedfarzad Famouri, Mostafa Baghani, Azadeh Sheidaei, Daniel George, Maryam Mazraehei Farahani, Masoud Shariat Panahi, Majid Baniassadi
    MATHEMATICS AND MECHANICS OF SOLIDS, Vol. -, 2022
71. "Assessment of controllable shape transformation, potential applications, and tensile shape memory properties of 3D printed PETG"
    Elias Soleiman, Mohammad Aberoumand, Davood Rahmatabadi, kianoush Soltanmohammadi, Esmaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 18, pp.4201-4215, 2022
72. "Insights into thermal characteristics of spiral carbon-based nanomaterials: From heat transport mechanisms to tunable thermal diode behavior"
    Ali Sharifian, Taraneh Karbaschi, Ali Rajabpour, Mostafa Baghani, Jianyang Prof. Wu, Majid Baniassadi
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, Vol. 189, No 189, 2022
73. "Prediction of bone microstructures degradation during osteoporosis with fuzzy cellular automata algorithm"
    Armin Shahmohammadi, Seyedfarzad Famouri, Seyed Mohammad Reza Hosseini, Maryam Mazraehei Farahani, Mostafa Baghani, Daniel George, Majid Baniassadi
    MATHEMATICS AND MECHANICS OF SOLIDS, Vol. -, 2022
74. "Effects of functional group type and coverage on the interfacial strength and load transfer of graphene-polyethylene nanocomposites: a molecular dynamics simulation"
    Mohammad Reza Karimi, Karen Abrinia, Khader M. Hamdia, Seyed Majid Hashemianzadeh, Majid Baniassadi
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, Vol. 128, No 4, 2022
75. "A comprehensive experimental investigation on 4D printing of PET-G under bending"
    Mohammaf Aberoumand, Kianoosh Soltanmohammadi, Elyas Soleyman, Davood Rahmatabadi, Ismaeil Ghasemi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani
    Journal of Materials Research and Technology-JMR&T, Vol. 18, pp.2552-2569, 2022
76. "Mechanical properties of an epoxy-based coating reinforced with silica aerogel and ammonium polyphosphate additives"
    Ramin Riahipour, Mohammad Saber Nemati, Mehdi Zadehmohamad, Mohammad reza Abadyan, Mehran Tehrani, Majid Baniassadi
    POLYMERS & POLYMER COMPOSITES, Vol. 30, No 1, 2022
77. "Conical coiled carbon nanotubes with highly controllable mechanical properties"
    Taraneh Karbaschi, Ali Sharifian, Parmida Fareghi, Mostafa Baghani, Jianyang Prof. Wu, Majid Baniassadi
    Materials Today Communications, Vol. 29, No 1, 2021
78. "Computational analysis of vincristine loaded silk fibroin hydrogel for sustained drug delivery applications: Multiphysics modeling and experiments"
    Ziba Gharehnazifam, Roshanak Dolatabadi, Majid Baniassadi, Hamid Shahsavari, Abdol-Mohammad Kajbafzadeh, Karen Abrinia, Mostafa Baghani
    INTERNATIONAL JOURNAL OF PHARMACEUTICS, Vol. 609, No 1, 2021
79. "On the directional elastic modulus of the TPMS structures and a novel hybridization method to control anisotropy"
    Saeed Khaleghi, Fayyaz Nosouhi Dehnavi, Mostafa Baghani, Masoud Safdari, Kui Wang, Majid Baniassadi
    MATERIALS & DESIGN, Vol. 210, No 1, 2021
80. "Simulating favorable adsorption in lithium-ion batteries using a novel cellular-automaton-based method"
    Omid Ziaee, Naeem Zolfaghari, Mostafa Baghani, Majid Baniassadi
    PHYSICA SCRIPTA, Vol. 96, No 12, 2021
81. "Anatase TiO2 nanotubes as Li-ion battery anodes: A molecular dynamics study of Li-ion adsorption on anatase nanotubes"
    Iman Zeydabadi, Naeem Zolfaghari, Mahmoud Mousavi Mashhadi, Mostafa Baghani, Majid Baniassadi
    SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS, Vol. 47, 2021
82. "A Microfabrication Method of PCL Scaffolds for Tissue Engineering by Simultaneous Two PDMS Molds Replication"
    Hassan Najafi sani, Karen Abrinia, Nooshin Haghighipour, Daniel George, Yve Remond, Majid Baniassadi
    ACS BIOMATERIALS SCIENCE & ENGINEERING, Vol. 7, No 10, pp.4763-4778, 2021
83. "Hydrostatic tube cyclic extrusion compression (HTCEC) as a novel severe plastic deformation method for fabricating long nanostructured tubes"
    M.. Eftekhari, Ghader Faraji, Mohsen Bahrami, Majid Baniassadi
    METALS AND MATERIALS INTERNATIONAL, Vol. 31, No 3, 2021
84. "A modified simulated annealing algorithm for hybrid statistical reconstruction of heterogeneous microstructures"
    Ali Haghverdi, Majid Baniassadi, Mostafa Baghani, Abolfazl Alizadeh Sahraei, Hamid Garmestani, Masoud Safdari
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 197, 2021
85. "A New Statistical Descriptor for the Physical Characterization and 3D Reconstruction of Heterogeneous Materials"
    AmirHossein Bagherian Rekavandi, Seyedfarzad Famouri, Mostafa Baghani, Daniel George, Azadeh Sheidaei, Majid Baniassadi
    TRANSPORT IN POROUS MEDIA, Vol. -, 2021
86. "Mechanical properties improvement of shape memory polymers by designing the microstructure of multi-phase heterogeneous materials"
    Mohamad mahdi Rafiee, Majid Baniassadi, Kui Wang, Mehdi Baniasadi, Mostafa Baghani
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 196, 2021
87. "Heat-treatment effects on dimensional stability and mechanical properties of 3D printed continuous carbon fiber-reinforced composites"
    Kui Wang, Hongmei Long, Ying Chen, Majid Baniassadi, Yanni Rao, Yong Pengab
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, Vol. 147, No 1, 2021
88. "Microstructural design of tunable elastoplastic two-phase random heterogeneous materials"
    Fayyaz Nosouhi Dehnavi, Masoud Safdari, Karen Abrinia, Majid Baniassadi
    Materials Today Communications, Vol. 27, No 1, 2021
89. "Design and Shape Optimization of a Biodegradable Polymeric Stent for Curved Arteries Using FEM"
    Yasaman Baradaran, Mostafa Baghani, Morteza Kazempour, Seyed Kianoosh Hosseini, Morad Karimpour, Majid Baniassadi
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 7, No 1, 2021
90. "Numerical Investigation of Axonal Damage for Regular and Irregular Axonal Distributions"
    Seid Morteza Kazempour, Amin Kazempour, Majid Baniassadi, Yves Remond, Mostafa Baghani
    FRONTIERS IN MECHANICAL ENGINEERING-SWITZERLAND, Vol. 7, 2021
91. "Development and implementation of a geometrically nonlinear beam theory model for SMA composite beams with asymmetric behavior"
    Kosar Samadi-aghdam, Pouya Fahimi, Majid Baniassadi, Mostafa Baghani
    COMPOSITE STRUCTURES, Vol. 259, 2021
92. "Refining anticipation of degraded bone microstructures during osteoporosis based on statistical homogenized reconstruction method via quality of connection function"
    Seyedfarzad Famouri, Amirhossein Bagherian, Armin Shahmohammadi, Daniel George, Mostafa Baghani, Majid Baniassadi
    International Journal of Computational Materials Science and Engineering, Vol. 09, No 4, 2020
93. "Atomistic simulation of interfacial properties and damage mechanism in graphene nanoplatelet/epoxy composites"
    Abolfazl Alizadeh Sahraei, Abdolhadi Mokarizadeh, Masumeh Foroutan, Daniel George, Denis Rodriguea, Majid Baniassadi
    COMPUTATIONAL MATERIALS SCIENCE, Vol. 184, 2020
94. "Computational modeling of degradation process on the mechanical performance of Poly-lactic acid /Magnesium composite"
    Armin Shahmohammadi, Mostafa Baghani, Masoud Shariat Panahi, Kui Wang, Ehsan Hasanpur, Majid Baniassadi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, Vol. 235, No 1, pp.3-18, 2020
95. "Numerical investigation of smart auxetic 3D meta-structures based on shape memory polymers via topology optimization"
    Ehsan Jebellat, Majid Baniassadi, Alireza Moshki, Kui Wang, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 15, pp.1838-1852, 2020
96. "On finite bending of visco-hyperelastic materials: a novel analytical solution and FEM"
    Mohammad Shojaeifard, Sara Sheikhi, Majid Baniassadi, Mostafa Baghani
    ACTA MECHANICA, Vol. 231, No 8, pp.3435-3450, 2020
97. "Numerical study of the conductive liquid metal elastomeric composites"
    Fayyaz Nosouhi, Masoud Safdari, Karen Abrinia, Azadeh Sheidaei, Majid Baniassadi
    Materials Today Communications, Vol. 23, 2020
98. "Developing a beam formulation for semi-crystalline two-way shape memory polymers"
    MohammadAli Maleki-Bigdeli, Majid Baniassadi, Kui Wang, Mostafa Baghani
    JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, Vol. 31, No 12, pp.1465-1476, 2020
99. "A framework for optimal microstructural design of random heterogeneous materials"
    Fayyaz Nosouhi Dehnavi, Masoud Safdari, Karen Abrinia, Ali Hasanabadi, Majid Baniassadi
    COMPUTATIONAL MECHANICS, Vol. 66, No 66, pp.123-139, 2020
100. "A computational approach to evaluate the nonlinear and noisy DC electrical response in carbon nanotube/polymer nanocomposites near the percolation threshold"
     Abolfazl Alizadeh Sahraei, Moosa Ayati, Denis Rodrigue, Majid Baniassadi
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 173, No 109439, 2020
101. "Design and Manufacture of a Smart Macro-Structure with Changeable Effective Stiffness"
     Mohammad reza Hajyghasem, Majid Safarabadifarahani, Azadeh Sheidaei, Mostafa Baghani, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 12, No 1, 2020
102. "A novel machine learning based computational framework for homogenization of heterogeneous soft materials: application to liver tissue"
     Mohammad Saber Hashemi, Majid Baniassadi, Mostafa Baghani, Daniel George, Yve Remond, Azadeh Sheidaei
     BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, Vol. **, pp.1-12, 2019
103. "Numerical Simulation of Osteoporosis Degradation at Local Scale: A Preliminary Study on the Kinematic Loss of Mechanical Bone Stiffness and Microstructure"
     Morteza Kazempour, Amirhossein Bagherian, Azadeh Sheidaei, Majid Baniassadi, Mostafa Baghani, Yve Remond, Daniel George
     Journal of Stem Cells & Regenerative Medicine, Vol. 79, pp.86-93, 2019
104. "Insights into interphase thickness characterization for graphene/epoxy nanocomposites: a molecular dynamics simulation"
     Abolfazl Alizadeh Sahraei, Abdol Hadi Mokarizadeh, Daniel George, Denis Rodrigue, Majid Baniassadi, Masumeh Foroutan
     PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 21, No 36, pp.19890-19903, 2019
105. "The Role of Chemical Doping on Large Deformation Behavior of Spiral Carbon-Based Nanostructures: Unraveling Geometry-Dependent Chemical Doping Effects"
     Ali Sharifian, Vahid Fadaei Naeini, Majid Baniassadi, Jianyang Prof. Wu, Mostafa Baghani
     Journal of Physical Chemistry C, Vol. in press, 2019
106. "A novel numerical model for the prediction of patient-dependent bone density loss in microgravity based on micro-CT images"
     Amirhossein Bagherian, Mostafa Baghani, Daniel George, Yve Remond, Christine CHAPPARD, S. A. Patlazhan, Majid Baniassadi
     CONTINUUM MECHANICS AND THERMODYNAMICS, Vol. 32, 2019
107. "The effectiveness of different thresholding techniques in segmenting micro CT images of porous carbonates to estimate porosity"
     Farzaneh Rezaei, Hossein Izadi, Hossein Memarian, Majid Baniassadi
     Geoenergy Sicence and Engineering, Vol. 177, pp.518-527, 2019
108. "Homogenization of heterogeneous brain tissue under quasi-static loading: a visco-hyperelastic model of a 3D RVE"
     Morteza Kazempour, Majid Baniassadi, Hamid Shahsavari, Yve Remond, Mostafa Baghani
     BIOMECHANICS AND MODELING IN MECHANOBIOLOGY, Vol. in press, pp.1-13, 2019
109. "Developing a Coupled Statistical and Monte Carlo Approach for Geometric Modeling and Optimizing of Infiltrated Solid Oxide Fuel Cell Electrode"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei, Masoud Safdari
     Fuel Cells, pp.1-13, 2019
110. "Numerical homogenization of coiled carbon nanotube reinforced shape memory polymer nanocomposites"
     Ebrahim Yarali, Majid Baniassadi, Mostafa Baghani
     Smart Materials and Structures, Vol. 28, No 3, 2019
111. "Influence of bone microstructure distribution on developed mechanical energy for bone remodeling using a statistical reconstruction method"
     Azadeh Sheidaei, Morteza Kazempour, Ali Hasanabadi, Fayyaz Nosouhi, Martine Pithioux, Majid Baniassadi, Yve Remond, Daniel George
     MATHEMATICS AND MECHANICS OF SOLIDS, Vol. 24, No 10, 2019
112. "Computational Elucidation of Elastic Percolation Threshold in Isotropic and Anisotropic Microstructures with Voronoi Tessellation"
     Vahid Fadaei Naeini, Mohammadhossein Zarei, Majid Baniassadi, Mehdi Shirani, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 11, No 2, 2019
113. "Exceptional behavior of anatase TiO2 nanotubes in axial loading: A molecular dynamics study of the effect of surface wrinkles"
     Iman Zeydabadi-nejad, Naeem Zolfaghari, Mahmoud Mousavi Mashhadi, Majid Baniassadi
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 158, No 1, pp.307-314, 2019
114. "Insight of Geometry-Controlled Mechanical Properties of Spiral Carbon-Based Nanostructures"
     Ali Sharifian, Mostafa Baghani, Jianyang Jianyang Wu, Gregory M Odegard, Majid Baniassadi
     Journal of Physical Chemistry C, Vol. 123, No 5, 2019
115. "How to characterize interfacial load transfer in spiral carbon-based nanostructure-reinforced nanocomposites: is this a geometry-dependent process?"
     Ali Sharifian, Mostafa Baghani, Gregory M Odegard, Jianyang Prof. Wu, Adri van Duin, Majid Baniassadi
     PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 21, No 43, pp.23880-23892, 2019
116. "Hydrogenation-controlled mechanical properties in graphene helicoids: exceptional distribution-dependent behavior"
     Ali Sharifian, Abouzar Moshfegh, Ashkan Javadzadegan, Hamid Hassanzadeh Afrouzi, Mostafa Baghani, Majid Baniassadi
     PHYSICAL CHEMISTRY CHEMICAL PHYSICS, Vol. 21, No 23, pp.12423-12433, 2019
117. "Impedance analysis for condition monitoring of single lap CNT-epoxy adhesive joint"
     Omid Sam Daliri, Lisa-marie Faller, Mohammadreza Farahani, Ali Roshanghias, Alireza Araee, Majid Baniassadi, Hannes Oberlercher, Hubert Zangl
     INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, Vol. 88, No 1, pp.59-65, 2019
118. "Stochastic reconstruction of carbon fiber paper gas diffusion layers of PEFCs: A comparative study"
     Sepehr Sima Afrookhteh, Jalil Jamali, Mohsen Shakeri, Majid Baniassadi
     Energy Equipment and Systems, Vol. 6, No 1, pp.51-59, 2019
119. "Determinative factors in inhibition of aquaporin by different pharmaceuticals: Atomic scale overview by molecular dynamics simulation"
     Vahid Fadaei Naeini, Masumeh Foroutan, Mina Maddah, Yves Remond, Majid Baniassadi
     BIOCHIMICA ET BIOPHYSICA ACTA-GENERAL SUBJECTS, Vol. 1862, No 12, pp.2815-2823, 2018
120. "Micromechanical Modeling of the Effective Mechanical Behavior of Cerebral Cortex Tissue"
     Hamid Shahsavari, Hossein Jokar, Mojtaba Haghighi Yazdi, Mostafa Baghani, Yve Remond, Daniel George, Maryam Mazraehei Farahani, Majid Baniassadi
     Iranian Journal of Science and Technology-Transactions of Mechanical Engineering, Vol. ***, pp.1-13, 2018
121. "Optimal combining of microstructures using statistical correlation functions"
     Ali Hasan Abadi, Majid Baniassadi, Karen Abrinia, Masoud Safdari, Hamid Garmestani
     INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, Vol. 160, No 1, pp.177-186, 2018
122. "AC and DC electrical behavior of MWCNT/epoxy nanocomposite near percolation threshold: Equivalent circuits and percolation limits"
     Abolfazl Alizadeh Sahraei, Moosa Ayati, Majid Baniassadi, Denis Rodrigue, Mostafa Baghani, Yaser Abdi
     JOURNAL OF APPLIED PHYSICS, Vol. 123, No 10, 2018
123. "3D-Printable Unit Cell Design for Cubic and Orthotropic Porous Microstructures Using Topology Optimization Based on Optimality Criteria Algorithm"
     Alireza Moshki, Akbar Ghazavizadeh, Ali Asghar Atai, Mostafa Baghani, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 10, No 6, 2018
124. "Optimization of Taylor spatial frame half-pins diameter for bone deformity correction: Application to femur"
     Pooria Chavoshnejad, Moosa Ayati, Aziz Abbasspour, Morad Karimpour, Daniel George, Yves Remond, Alireza Heidary Rouchi, Majid Baniassadi
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, Vol. 232, No 7, pp.673-681, 2018
125. "Analytical Solution of Governing Equations of Triple Coupled Physics of Structural Mechanics, Diffusion, and Heat Transfer"
     Ehsan Mahdavi, Mojtaba Haghighi Yazdi, Majid Baniassadi, Mehran Tehrani, Said Ahzi, Jalil Jamali
     Scientia Iranica, 2018
126. "Contact angle hysteresis and motion behaviors of a water nano-droplet on suspended graphene under temperature gradient"
     Masumeh Foroutan, S. Mahmood Fatemi Sh., Farshad Esmaeilian, Vahid Fadaei Naeini, Majid Baniassadi
     PHYSICS OF FLUIDS, Vol. 30, No 5, 2018
127. "Microstructure Reconstruction and Characterization of the Porous GDLs for PEMFC Based on Fibers Orientation Distribution"
     Sepehr Sima Afrookhteh, Mohsen Shakeri, Majid Baniassadi, Abolfazl Alizadeh Sahraei
     Fuel Cells, Vol. 18, No 2, pp.160-172, 2018
128. "A Geometric Modeling Approach to Find the Best Microstructure for Infiltrated SOFC Electrodes"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei
     Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, pp.55-66, 2018
129. "A new approach to microstructure optimization of solid oxide fuel cell electrodes"
     Mehdi Tafazolic, Mohsen Shakeri, Mohammad Riazata, Majid Baniassadi
     Iranian Journal of Hydrogen and Fuel Cell, Vol. 14, No 1, pp.93-102, 2018
130. "Effect of nanofiller geometry on the energy absorption capability of coiled carbon nanotube composite material"
     Ensieh Yousefi, Azadeh Sheidaei, Mostafa Mahdavi, Majid Baniassadi, Mostafa Baghani, Ghader Faraji
     COMPOSITES SCIENCE AND TECHNOLOGY, Vol. 153, No 1, pp.222-231, 2018
131. "Free Vibration Analysis of Rotating Functionally Graded Annular Disc of Variable Thickness Using Generalized Differential Quadrature Method"
     Mohammadhadi Jalali, Behrooz Shahriari, Omid Zargar, Mostafa Baghani, Majid Baniassadi
     Scientia Iranica, Vol. 25, No 1, pp.1-13, 2018
132. "Microstructure and mechanical properties of fine-grained thin-walled AZ91 tubes processed by a novel combined SPD process"
     Hooman Abdolvand, Ghader Faraji, Majid Baniassadi
     BULLETIN OF MATERIALS SCIENCE, Vol. 40, No 40, 2018
133. "An Investigation on Thermal Stresses in FGM Hyperelastic Thick-Walled Cylinders"
     Akbar Almasi, Mostafa Baghani, Ali Moallemi, Majid Baniassadi, Ghader Faraji
     JOURNAL OF THERMAL STRESSES, Vol. 41, No 2, 2018
134. "Effect of 2D Image Resolution on 3D Stochastic Reconstruction and Developing Petrophysical Trend"
     Hossein Izadi, Majid Baniassadi, Fateme Hormozzade, Fayaz Nosouhi Dehnavi, Ali Hasanabadi, Hossein Memarian, Hamid Soltanian Zadeh
     TRANSPORT IN POROUS MEDIA, Vol. 1, No 1, pp.1-18, 2018
135. "Monitoring the effect of sonoporation on the cells using electrochemical approach"
     Mohammad Ali Khayamian, Majid Baniassadi, Mohammad Abdolahad
     ULTRASONICS SONOCHEMISTRY, Vol. 41, No 13504177, pp.619-625, 2017
136. "Large deformation and stability analysis of functionally graded pressure vessels: An analytical and numerical study"
     Ali Moallemi, Mostafa Baghani, Akbar Almasi, Mohammad Reza Zakerzadeh, Majid Baniassadi
     PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, Vol. -, 2017
137. "Application of Elastic-Damage-Heal Model for Self-Healing Concrete Thick-Walled Cylinders Through Thermodynamics of Irreversible Processes"
     Amin Kazemi, Mostafa Baghani, Hamid Shahsavari, Karen Abrinia, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 9, No 6, 2017
138. "An investigation on effect of backbone geometric anisotropy on the performance of infiltrated SOFC electrodes"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei
     Energy Equipment and Systems, Vol. 5, No 3, pp.251-264, 2017
139. "Ultrasound assisted electrochemical distinction of normal and cancerous cells"
     Mohammad Ali Khayamian, Saeid Ansaryan, Saied Rafizadeh Tafti, Mohammad Saeid Nikshoar, Morteza Hasanpour Amiri, Majid Baniassadi, Mohammad Abdolahad
     SENSORS AND ACTUATORS B-CHEMICAL, Vol. 255, No 9254005, pp.1-7, 2017
140. "Investigation of the geometric property hull for infiltrated solid oxide fuel cell electrodes"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei
     INTERNATIONAL JOURNAL OF ENERGY RESEARCH, Vol. 41, No 14, pp.2318-2331, 2017
141. "Effective thermal and mechanical properties of short carbon fiber/natural rubber composites as a function of mechanical loading"
     Mostafa Mahdavi, Ensieh Yousefi, Majid Baniassadi, Morad Karimpour, Mostafa Baghani
     APPLIED THERMAL ENGINEERING, Vol. 117, pp.8-16, 2017
142. "A geometric modeling approach to find the best Microstructure for infiltrated SOFC electrodes"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei
     Amirkabir Journal of Mechanical Engineering, Vol. 1, No 1, pp.55-66, 2017
143. "Surface modification of severe plastically deformed ultrafine grained pure titanium by plasma electrolytic oxidation"
     Farshid Reshadi, Ghader Faraji, Majid Baniassadi, Mohsen Tajedini
     SURFACE & COATINGS TECHNOLOGY, Vol. 316, No 316, 2017
144. "Developing a finite element beam theory for nanocomposite shape memory polymers with application to sustained release of drugs"
     Mostafa Baghani, Roshanak Dolatabadi, Majid Baniassadi
     Scientia Iranica, Vol. 24, No 1, pp.249-259, 2017
145. "Investigation of the property hull for solid oxide fuel cell microstructures"
     Mohammad Riazata, Mehdi Tafazolic, Majid Baniassadi, Masoud Safdari, Ghader Faraji, Hamid Garmestani
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 127, No 127, pp.1-7, 2017
146. "Geometric Modeling of Infiltrated Solid Oxide Fuel Cell Electrodes with Directional Backbones"
     Mehdi Tafazolic, Mohsen Shakeri, Majid Baniassadi, Alireza Babaei
     Fuel Cells, Vol. 1, No 1, 2017
147. "Elastic percolation of composite structures with regular tessellations of microstructure"
     Mohammad Hosein Zarei, Vahid Fadaei Naeini, Mostafa Baghani, Jalil Jamali, Majid Baniassadi
     COMPOSITE STRUCTURES, Vol. 161, pp.513-521, 2017
148. "Improving flame-retardant, thermal, and mechanical properties of an epoxy using halogen-free fillers"
     Ramin Riahipour, Abolfazl Alizadeh Sahraei, Mehran Tehrani, Karen Abrinia, Nekoda Van De Werken, Majid Baniassadi
     SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2017
149. "Application of full set of two point correlation functions from a pair of 2D cut sections for 3D porous media reconstruction"
     Hossein Izadi, Majid Baniassadi, Ali Hasanabadi, Behzad Mehrgini, Hossein Memarian, Hamid Soltanian Zadeh, Karen Abrinia
     Geoenergy Sicence and Engineering, Vol. 149, No 149, pp.789-800, 2017
150. "Temperature and stress distribution in hollow annular disk of uniform thickness with quadratic temperature-dependent thermal conductivity"
     Masoud Molla-aghaei-roozbahani, Hanieh Razzaghi, Mostafa Baghani, Majid Baniassadi, مهدی لایقی فرد
     JOURNAL OF THERMAL STRESSES, Vol. in press, 2016
151. "Thermomechanical behavior of shape memory polymer beams reinforced by corrugated polymeric sections"
     Amin Jamalimehr, Mostafa Baghani, Majid Baniassadi, Mohammad Reza Zakerzadeh
     MECCANICA, Vol. 52, No 8, pp.1947-1962, 2016
152. "Optimization of solid oxide fuel cell cathodes using two-point correlation functions"
     Ali Hasanabadi, Majid Baniassadi, Karen Abrinia, Masoud Safdari, Hamid Garmestani
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 123, No 123, pp.268-276, 2016
153. "Efficient three-phase reconstruction of heterogeneous material from 2D cross-sections via phase-recovery algorithm"
     Ali Hasanabadi, Majid Baniassadi, Karen Abrinia, Masoud Safdari, Hamid Garmestani
     JOURNAL OF MICROSCOPY, pp.1-10, 2016
154. "An Investigation on Thermomechanical Flexural Response of Shape-Memory-Polymer Beams"
     Masoud Molla-aghaei-roozbahani, Navid Heidarzadeh, Mostafa Baghani, Amirhossein Eskandari, Majid Baniassadi
     International Journal of Applied Mechanics, Vol. 08, No 5, 2016
155. "Elastic Percolation in Nanocomposites with Impenetrable Ellipsoidal Inclusion (Comprehensive Study of Geometry and Interphase Thickness)"
     Ziba Gharehnazifam, Majid Baniassadi, Karen Abrinia, Morad Karimpour, Mostafa Baghani
     International Journal of Applied Mechanics, Vol. 08, No 4, 2016
156. "Modeling and Homogenization of Shape Memory Polymer Nanocomposites"
     Mehrzad Taherzadeh, Mostafa Baghani, Majid Baniassadi, Karen Abrinia, Masoud Safdari
     COMPOSITES PART B-ENGINEERING, Vol. 91, No 1, pp.36-43, 2016
157. "Evaluation of solid oxide fuel cell anode based on active triple phase boundary length and tortuosity"
     Ali Hasanabadi, Majid Baniassadi, Karen Abrinia, Mostafa Baghani, Mohsen Mazroee
     Energy Equipment and Systems, Vol. 4, No 1, pp.11-19, 2016
158. "3D microstructural reconstruction of heterogeneous materials from 2D cross sections: A modified phase-recovery algorithm"
     Ali Hasanabadi, Majid Baniassadi, Karen Abrinia, Masoud Safdari, Hamid Garmestani
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 111, No 111, pp.107-115, 2016
159. "Designing an optimal 3D microstructure for three-phase solid oxide fuel cell anodes with maximal active triple phase boundary length (TPBL)"
     Mohsen Mazroee, Majid Baniassadi, Jalil Jamali, Mohammad Ahadiparast, Karen Abrinia, Masoud Safdari
     INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, Vol. 40, No 45, pp.15585-15596, 2015
160. "Formation of homogenous copper film on MWCNTs by an efficient electroless deposition process"
     Abolfazl Alizadeh Sahraei, Hamidreza Naser Saeed, Alireza Fathi, Majid Baniassadi, Sepehr Sima Afrookhteh, Mohammad Kazem Besharati Givi
     SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, Vol. ------------, pp.1-8, 2015
161. "3D reconstruction of carbon nanotube networks from neutron scattering experiments"
     Mostafa Mahdavi, Majid Baniassadi, Mostafa Baghani, Mark Dadmun, Mehran Tehrani
     NANOTECHNOLOGY, Vol. 26, No 38, 2015
162. "Synergistic effect of carbon nanotubes and copper particles in an epoxy-based nanocomposite using electroless copper deposited carbon nanotubes: Part I - Mechanical properties"
     Masoumeh Nazem Salimi, Abolfazl Alizadeh Sahraei, Majid Baniassadi, Karen Abrinia, Morteza Ehsani
     JOURNAL OF COMPOSITE MATERIALS, Vol. 50, No 14, pp.1909-1920, 2015
163. "Electrical Percolation in Nanocomposites with Impenetrable Ellipsoidal Inclusion (Comprehensive Study of Tunneling, Geometry, Anisotropy and Mixing)"
     Ziba Gharehnazifam, Majid Baniassadi, Karen Abrinia, Mostafa Rahimi, Morteza Izadi
     Journal of Computational and Theoretical Nanoscience, Vol. 12, No 6, pp.1010-1016, 2015
164. "An interfacial debonding-induced damage model for graphite nanoplatelet polymer composites"
     Mohammad Safaei, Azadeh Sheidaei, Majid Baniassadi, Said Ahzi, Mahmoud Mousavi Mashhadi, Farhang Pourboghrat
     COMPUTATIONAL MATERIALS SCIENCE, Vol. 96, pp.191-199, 2015
165. "The Effect of cathode Porosity on Solid Oxide Fuel Cell Performance"
     Mohammad Riazata, Majid Baniassadi, Mohsen Mazrouei, Mehdi Tafazolic, Mahdi Moghimi Zand
     Energy Equipment and Systems, Vol. 3, No 1, pp.25-32, 2015
166. "Evaluating the Effect of Mechanical Loading on the Effective Thermal Conductivity of CNT/Polymer Nanocomposites"
     Mohsen Mazrouei, Hossein Jokar, Majid Baniassadi, Karen Abrinia, Mojtaba Haghighi Yazdi
     Journal of Computational and Theoretical Nanoscience, Vol. 11, No 8, pp.1738-1744, 2014
167. "An optimum approximation of n-point correlation functions of random heterogeneous material systems"
     Masoud Safdari, Hamid Garmestani, Majid Baniassadi, Said Ahzi, Philippe H. Geubelle, Yve Remond
     JOURNAL OF CHEMICAL PHYSICS, Vol. 140, No 7, 2014
168. "A new approach for achieving excellent strain homogeneity in tubular channel angular pressing (TCAP) process"
     Ghader Faraji, Farshid Reshadi, Majid Baniassadi
     Journal of Advanced Materials and Processing, Vol. 2, No 1, 2014
169. "Three-Dimensional Reconstruction and Microstructure Modeling of Porosity-Graded Cathode Using Focused Ion Beam and Homogenization Techniques"
     Hoda Amanihamedani, Majid Baniassadi, Azadeh Sheidaei, Farhang Pourboghrat, Yves Remond, Mohammad Khaleel, Hamid Garmestani
     Fuel Cells, Vol. 14, No 1, pp.91-95, 2013
170. "Microstructure reconstruction and homogenization of porous Ni-YSZ composites for temperature dependent properties"
     طالبی, شادی موثقی, Majid Baniassadi, ع پوربخش, Hamid Garmestani
     JOURNAL OF POWER SOURCES, Vol. 1, No 235, pp.74-80, 2013
171. "Modeling of two-phase random composite materials by finite element, Mori–Tanaka and strong contrast methods"
     بحیرا مرتضوی, Majid Baniassadi, جویا جدیدیان, Said Ahzi
     COMPOSITES PART B-ENGINEERING, Vol. 45, No 1, pp.1117-1125, 2013
172. "A modified strong-contrast expansion for estimating the effective thermal conductivity of multiphase heterogeneous materials"
     س صفدری, Majid Baniassadi, Hamid Garmestani, مروارید ساکی
     JAPANESE JOURNAL OF APPLIED PHYSICS, Vol. 11, No 112, 2012
173. "Composition of two-point correlation functions of sub-composites in heterogeneous materials"
     Akbar Gha, Naser Soltani, Fre Adi, سعادت احمدزاده, Majid Baniassadi, Hamid Garmestani
     MECHANICS OF MATERIALS, Vol. 51, No 51, pp.88-96, 2012
174. "تاثیر عاملدارسازی به وسیله هیدروژن بر خواص حرارتی نانولوله های کربنی فنری"
     مهدی اظهری سرای، علی رجب پور، مجید بنی اسدی
     مدل سازی در مهندسی، نسخه 21، شماره 74، 1402
175. "چاپ سه بعدی آمیزه های هوشمند PETG با تحریک گرمایی"
     کیاندخت میر اسدی، داود رحمت آبادی، اسماعیل قاسمی، مجید بنی اسدی، مصطفی باغانی
     مهندسی مکانیک مدرس، نسخه 23، شماره 10، صفحات:125-130، 1402
176. "تحریک مستقیم و غیرمستقیم حرارتی نانوکامپوزیت های فراوری مشخصات مقاله چکیده شده با چاپ سه بعدی"
     کیاندخت میر اسدی، داود رحمت آبادی، اسماعیل قاسمی، مجید بنی اسدی، مصطفی باغانی
     مهندسی مکانیک مدرس، نسخه 23، شماره 10، صفحات:131-136، 1402
177. "همگن سازی و تحلیل انتقال حرارت نانوکامپوزیت پلی اتیلن تقویت شده با نانولوله های کربنی هلیکال"
     ابراهیم یارعلی، مجید بنی اسدی، مصطفی باغانی
     نشریه مهندسی مکانیک ایران، نسخه 23، شماره 62، 1401
178. "مطالعه تاثیر روش اکستروژن فشاری تناوبی هیدرواستاتیک لوله بر خواص آلیاژ آلومینیوم 5052"
     محمد افتخاری، قادر فرجی، مصطفی بهرامی، مجید بنی اسدی
     مجله علمی پژوهشی مهندسی ساخت و تولید، نسخه 8، شماره 8، 1400
179. "اندازه گیری تراوایی با استفاده از توموگرافی پرتو ایکس پزشکی در یکی از میادین جنوب باختر ایران"
     فاطمه هرمززاده قلاتی، مجید بنی اسدی، فریدون سحابی، حسین ایزدی، حسین معماریان
     فصلنامه علمی-پژوهشی علوم زمین، نسخه 28، شماره 110، 1397
180. "مروری بر توابع همبستگی آماری و بازسازی میکرو/ نانوکامپوزیت ها"
     مصطفی مهدوی، انسیه یوسفی، مجید بنی اسدی
     مجله مهندسی مکانیک شریف(شریف سابق)، نسخه 34.3، شماره 2، صفحات:31-40، 1397
181. "شبیه سازی و بررسی نانو کامپوزیت پلیمری تقویت شده با نانولوله های کربنی و نانو هلیکال های کربنی"
     انسیه یوسفی، مجید بنی اسدی، مصطفی مهدوی، مصطفی باغانی، قادر فرجی
     مجله مهندسی مکانیک شریف(شریف سابق)، نسخه 34.3، شماره 2، صفحات:95-102، 1397
182. "مدل¬سازی سه بعدی سلولی و همگن¬سازی میکرومکانیکی بافت نامنظم مغز"
     حسین جوکار، مجید بنی اسدی، مجتبی حقیقی یزدی، مریم مزرعه ئی فراهانی، نبی الله ابوالفتحی
     نشریه مهندسی مکانیک ایران، نسخه 20، شماره 1، صفحات:25-45، 1397
183. "تحلیل استاتیکی تنش ها و کرنش های وارد بر استخوان فمور متصل به قاب فضایی تیلور"
     پوریا چاوش نژاد، سیدموسی آیتی، مجید بنی اسدی، عزیز عباسپور، مریم مزرعه ئی فراهانی، علیرضا حیدری روچی
     مکانیک سازه ها و شاره ها، نسخه 8، شماره 1، صفحات:13-21، 1397
184. "بهینه سازی آرایش و ساخت نانولولههای اکسید تیتانیوم جهت بهبود عملکرد آند باتریهای یون لیتیومی"
     محسن تاج الدینی، مهدی شیرانی، جلیل جمالی، ایمان زید آبادی، مجید بنی اسدی
     مهندسی مکانیک مدرس، نسخه 18، شماره 1، صفحات:20-26، 1397
185. "روش های تعیین تراوایی پلاگ های سنگی مخازن نفتی، با استفاده از تصویربرداری پزشکی"
     فاطمه هرمززاده، حسین معماریان، مجید بنی اسدی، حسین ایزدی، فریدون سحابی
     نظام مهندسی معدن، نسخه 1396، شماره 33، صفحات:12-18، 1396
186. "تحلیل اجزا محدود برای تیر پلیمری حافظه دار تیموشنکو"
     امیرحسین اسکندری، مصطفی باغانی، مجید بنی اسدی
     مهندسی مکانیک مدرس، نسخه 17، شماره 8، صفحات:351-359، 1396
187. "بررسی تاثیر وجود نانوذرات گرافن بر عملکرد نانوکامپوزیت پایه پلیمر حافظه دار"
     مصطفی باغانی، مجید بنی اسدی
     مجله مهندسی عمران شریف، نسخه 3-33، شماره 1، صفحات:137-145، 1396
188. "بررسی تجربی اثر دما در اکستروژن تیتانیم خالص نانو ساختار تولید شده به روش ایکپ"
     محمد افتخاری، قادر فرجی، امید شاپورگان، مجید بنی اسدی
     مهندسی مکانیک مدرس، نسخه 17، شماره 4، 1396
189. "بازسازی سه بعدی ریزساختار ناهمگن دو فازی بر اساس تک مقطع دو بعدی به کمک توابع همبستگی دو نقطه ای و الگوریتم بازیابی فاز"
     علی حسن آبادی، مجید بنی اسدی، کارن ابری نیا
     مجله مهندسی مکانیک شریف(شریف سابق)، نسخه 33.3، شماره 2، صفحات:115-121، 1395
190. "بازسازی سه بعدی کامپوزیت نانولوله کربنی با استفاده از توابع آماری همبستگی"
     مصطفی مهدوی، مجید بنی اسدی، مصطفی باغانی
     مکانیک سازه ها و شاره ها، نسخه 6، شماره 3، صفحات:33-42، 1395
191. "مدل سازی جدایش در برخورد صفحات فلزی با در نظر گرفتن اثر دما، نرخ کرنش و آسیب"
     مصطفی باغانی، محمد رضا ذاکر زاده، مجید بنی اسدی
     مکانیک سازه ها و شاره ها، نسخه 5، شماره 3، صفحات:39-50، 1394
192. "فرایندهای ساخت لایه های پیل سوختی اکسید جامد (مقاله مروری)"
     محسن مزروعی، کارن ابری نیا، جلیل جمالی، مهدی تفضلی، مجید بنی اسدی
     نشریه مهندسی مکانیک ایران، نسخه هفدهم، شماره 1، صفحات:55-82، 1394

مقالات علمی ارائه شده در همایش‌ها

1. "Vincristine Loaded Silk Fibroin Hydrogel for Sustained Drug Delivery"
   Ziba Gharehnazifam, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
2. "Modeling Particle Movement and Transient Adsorption Behavior with Cellular Automata"
   Omid Ziaee, Mostafa Baghani, Majid Baniassadi
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
3. "Effect of printing parameters on the shape transformation of 3D printed PETG"
   Elyas Soleyman, D.. Rahmat Abadi, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
4. "Experimental investigation on 4D printing of PET-G"
   Elyas Soleyman, Davood Rahmatabadi, Majid Baniassadi, Mostafa Baghani
   30th Annual International Conference of Iranian Society of Mechanical Engineers, 2022
5. "An investigation into the mechanical properties of polymer composite reinforced by coiled carbon nanotubes"
   Parmida Fareghi, Taraneh Karbaschi, Ali Sharifian, Ali Rajabpour, Mostafa Baghani, Majid Baniassadi
   Fourth International Conference on Interdisciplinary Studies in Nanotechnology, 2022
6. "A generalized mobile automaton for simulating particle deposition on a wall: effect of movement rules and wall shape"
   Omid Ziaee, Majid Baniassadi, Naeem Zolfaghari, Mostafa Baghani
   International Conference on Innovation and Research in Engineering Sciences (ICIRES), 2021
7. "An investigation into the impression of geometrical parameters of multi-wall coiled carbon nanotubes’ constructing components on their mechanical deformation using molecular dynamics simulation"
   Parmida Fareghi, Taraneh Karbaschi, Ali Sharifian, Mostafa Baghani, Majid Baniassadi
   2nd International Conference on Nanotechnology & Nanoscience, 2021
8. "Numerical Simulation of Osteoporosis Degradation at Local Scale: A Preliminary Study on the Kinematic Loss of Mechanical Bone Stiffness and Microstructure"
   Morteza Kazempour, AmirHossein Bagherian Rekavandi, Azadeh Sheidaei, Majid Baniassadi, Mostafa Baghani, Yve Remond, Daniel George
   IOS Press, Biomedical and Health Research, Stem Cells and Regenerative Medicine, 2019
9. "3D micromechanical homogenization of brain tissue considering random neuronal distribution within the extracellular matrix"
   Hamid Shahsavari, Hossein Jokar, Mostafa Baghani, Maryam Mazraeh Ei Farahani, Daniel George, Yve Remond, Majid Baniassadi
   EUROMECH-Colloquium 579 in Arpino (FR), Italy, 2019
10. "Investigation of the Carbonate Rock Permeability Based on X-Ray Tomography Images"
    Fateme Hormozzade, Majid Baniassadi, Azadeh Sheidaei, Hossein Izadi, Hossein Memarian
    Proceedings of the American Society for Composites: Thirty-Second Technical Conference, 2017
11. "Energetics of Ion Permeation Process through Mechanosensitive Channels of Large Conductance by Adaptive Biasing Force Method"
    Vahid Fadaei Naeini, Majid Baniassadi, Masumeh Foroutan
    20th Iranian physical chemistry conference, 2017
12. "Mechanistic Characters of Ion Permeation through Mechanosensitive Channels of Large Conductance: A Steered Molecular Dynamics Study"
    Vahid Fadaei Naeini, Majid Baniassadi, Masumeh Foroutan
    20th Iranian physical chemistry conference, 2017
13. "Investigating mechanical properties of coiled carbon nanotube reinforced nanocomposite"
    Ensieh Yousefi, Mostafa Mahdavi, Majid Baniassadi
    25th annual international conference of ISME, 2017
14. "Geometric Modeling of Infiltrated Solid Oxide Fuel Cell Electrodes for Performance Optimization"
    Mehdi Tafazolic, Majid Baniassadi, Alireza Babaei, محسن شاکری
    5th International Biennial Conference on Ultrafine Grained and Nanostructured Materials, UFGNSM15, 2015
15. "Investigation on Effects of Functionalization Methods on Mechanical Properties of Epoxy-based Nanocomposites Containing Copper Coated MWCNTs"
    Karen Abrinia, Mohamadreza Vaziri, Majid Baniassadi, Saaed Ehsani, Parvaneh Nazem-o-lroaya
    Proceedings of 5th International Congress on Nanoscience & Nanotechnology (ICNN2014), 2014
16. "معرفی دستگاه تست کشش چندمنظوره ترمومکانیکی با قابلیت کنترل دما و نرخ های افزایشی و کاهشی دما"
    الیاس سلیمان، داود رحمت آبادی، مجید بنی اسدی، مصطفی باغانی
    سی امین همایش سالانه بین المللی انجمن مهندسان مکانیک ایران، 1401
17. "ارائه روش ارتقاء یافته سیمپ برای طراحی سه¬بعدی میکروساختارها"
    علیرضا مشکی، علی اصغر عطائی، مجید بنی اسدی
    بیست و پنجمین همایش سالانه بین المللی مهندسی مکانیک، 1396
18. "بازسازی 3بعدی هندسه پلاگهای سنگی یکی از مخازن جنوب غربی ایران با استفاده از تصاویر سی تی اسکن"
    فاطمه هرمززاده، حسین معماریان، مجید بنی اسدی، فریدون سحابی
    دومین کنفرانس ملی ژئومکانیک نفت، 1395
19. "الگوریتم محاسبه کمی مرزهای سه گانه در ساختار سه بعدی آند پیل سوختی اکسید جامد"
    محسن مزروعی، مجید بنی اسدی، جلیل جمالی، کارن ابری نیا
    سومین کنفرانس هیدروژن و پیل سوختی، 1394